The path cost is used when establishing the active topology of the network. Lower path cost ports are chosen as forwarding ports in favor of higher path cost ports. Valid values are in the range 1 to 200,000,000. Priority Set or show the port priority. This can be used to control priority of ports having identical port cost. (See above). operEdge (state flag) Displays the operational flag describing whether the port is connecting directly to edge devices. (No Bridges attached). Transition to the forwarding state is faster for edge ports (having operEdge true) than for other ports. The value of this flag is based on AdminEdge and AutoEdge fields. This flag is displayed as Edge in Monitor->Spanning Tree -> STP Detailed Bridge Status. AdminEdge Set or show whether the operEdge flag should start as set or cleared. (The initial operEdge state when a port is initialized). Edge: operEdge flag should start as set Non- Edge: operEdge flag is not set
AutoEdge Set or show the AutoEdge status for this bridge port.
Enable automatic edge detection on the bridge port (This is the default.)
Disable automatic edge detection on the bridge port This allows operEdge to be derived from whether BPDU’s are received on the port or not.
Restricted Role Set or show the Restricted Role status for this bridge port.
Enabled – port will not be selected as a Root Port for the CIST or any MSTI
Disabled – port may be selected as a Root Port for the CIST or any MSTI (This is the default.) If enabled, the port will not to be selected as Root Port for the CIST or any MSTI, even if it has the best spanning tree priority vector. Such a port will be selected as an Alternate Port after the Root Port has been selected. If enabled, it can cause lack of spanning tree connectivity. It can be set by a network administrator to prevent bridges external to a core region of the network influencing the spanning tree active topology, possibly because those bridges are not under the full control of the administrator. This feature is also known as Root Guard. Restricted TCN Set or show the Restricted TCN (Topology Change Notification) status for this bridge port. Enabled – port will not propagate received topology change notifications and topology changes to other ports
SMB - CLI UM
Rev: 1.1
Page 146 of 275
www.amphenol-socapex.com
Tel : +33(0)4.50.89.28.00
Made with FlippingBook interactive PDF creator