Disabled – port may propagate received topology change notifications and topology changes to other ports (This is the default.) If enabled, causes the port not to propagate received topology change notifications and topology changes to other ports. If set it can cause temporary loss of connectivity after changes in a spanning tree’s active topology as a result of persistently incorrect learned station location information. It is set by a network administrator to prevent bridges external to a core region of the network, causing address flushing in that region, possibly because those bridges are not under the full control of the administrator or the physical link state of the attached LANs transits frequently. BPDU Guard Set or show the BPDU Guard status for this bridge port.
Enabled – The Port will disable itself upon receiving valid BPDUs
Disabled – The Port will not disable itself upon receiving valid BPDUs (This is the default.) Contrary to the similar bridge setting, the port Edge status does not affect this setting. A port entering error-disabled state due to this setting is subject to the bridge Port Error Recovery (shown on page 144) setting as well. Point-to-Point Set or show whether the port connects to a point-to-point LAN rather than to a shared medium. Auto: Determine automatically Forced True Force to true Forced False Force to false Transition to the forwarding state is faster for point-to-point LANs than for shared media.
4.29.2
STP CIST Port Configuration Buttons Save: Click to save all changes Reset:
Click to undo any changes made locally and revert to previously saved values
SMB - CLI UM
Rev: 1.1
Page 147 of 275
www.amphenol-socapex.com
Tel : +33(0)4.50.89.28.00
Made with FlippingBook interactive PDF creator