clear access-list ace statistics
2.2.3
Clear Dot1x Clears the statistics counters for IEEE Standard for port-based Network Access Control. Syntax: clear dot1x statistics [ interface ( <port_type> [ <v_port_type_list> ] ) ] clear dot1x statistics interface: <port_type>: values are: * All switches or all ports GigabitEthernet: set specific Gigabit Ethernet Port number [ <v_port_type_list>: port list in 1/1-8
2.2.4
Clear IP interface Internet Protocol config commands. IP ARP Clear ARP cache. Syntax: clear ip arp
IP IGMP Clear running IGMP snooping counters. Syntax: clear ip igmp snooping [ vlan <v_vlan_list> ] statistics [ vlan <v_vlan_list> ]: VLAN identifier(s): VID)
IP Statistics Clear IP statistic. Syntax: clear ip statistics [ system ] [ interface vlan <v_vlan_list> ] [ icmp ] [ icmp-msg <type> ]
[ system ]: IPv4 system traffic [ interface vlan <v_vlan_list> ]:
VLAN identifier(s): VID)
[ icmp ]: IPv4 ICMP traffic [ icmp-msg <type> ]:
IPv4 ICMP traffic for designated message type ( <type : 0~255> ICMP message type ranges from 0 to 255)
Examples: clear ip statistics clear ip statistics icmp-msg 2 clear ip statistics interface vlan 2 clear ip statistics system
SMB - CLI UM
Rev: 1.1
Page 15 of 275
www.amphenol-socapex.com
Tel : +33(0)4.50.89.28.00
Made with FlippingBook interactive PDF creator