Valid Ether Type can be: Specific: Requires a specific Value . Valid EtherType values are: 0x600-0xFFFF Excluding: 0x800 (IPv4) and 0x86DD (IPv6) Any LLC Parameters Set or show the LLC Parameters. When the “Specific” option is selected for an LLC parameter, the user must enter a valid value for that parameter.
SSAP Address:
Specific:
Value: valid SSAP (Source Service Access Point) can
vary from 0x00 to 0xFF Any
DSAP Address:
Specific:
Value: valid DSAP(Destination Service Access Point)
can vary from 0x00 to 0xFF Any
Control:
Specific:
Value: Control field can vary from 0x00 to 0xFF
Any
SNAP Parameters Set or show the SNAP Parameters. When the “Specific” option is selected for a SNAP parameter, the user must enter a valid value for that parameter.
PID:
Specific:
Value: valid PID (a.k.a Ether Type) can be 0x0000-
0xFFFF
Any
IPv4 Parameters Set or show the IPv4 Parameters. When one of the following options is selected for an IPv4 parameter: “Specific”, “Other”, or “Range” the user must enter a valid value in each of the value fields that open for that parameter.
SMB - CLI UM
Rev: 1.1
Page 181 of 275
www.amphenol-socapex.com
Tel : +33(0)4.50.89.28.00
Made with FlippingBook interactive PDF creator