RES-SCE-8MG - SMB CLI - User Manual Rev 1.01 - A TERMINER

Protocol:

Any UDP TCP Other: Value: IP protocol number: 0-255

SIP:

Specific:

Value/Mask: Source IP address in value/mask format

Any IP and Mask are in the format x.y.z.w where x, y, z, and w are decimal numbers between 0 and 255. When Mask is converted to a 32-bit binary string and read from left to right, all bits following the first zero must also be zero. If a port is configured to match on DMAC/DIP, this field is the Destination IP address. IP Fragment: IPv4 frame fragmented option values: Yes No Any DSCP: Diffserv Code Point (DSCP) values: Specific value Range of values Any Values are in the range 0-63 including BE, CS1-CS7, EF or AF11-AF43.

IPv4 – TCP/UDP Parameters

Sport: Source TCP/UDP port values: Specific: Value: (0-65535) Any Set a specific or port range applicable for IP protocol TCP/UDP. Dport: Destination TCP/UDP port values: Specific: Value: (0-65535) Any Set a specific or port range applicable for IP protocol TCP/UDP.

SMB - CLI UM

Rev: 1.1

Page 182 of 275

www.amphenol-socapex.com

Tel : +33(0)4.50.89.28.00

Made with FlippingBook interactive PDF creator