IPv6 Parameters Set or show the IPv6 Parameters. When one of the following options is selected for an IPv6 parameter: “Specific”, “Other”, or “Range” the user must enter a valid value in each of the value fields that open for that parameter.
Protocol:
Any UDP TCP Other: Value: IP protocol number: 0-255
SIP:
Specific:
Value/Mask: 32 LS bits of IPv6 source address in
value/mask format Any If a port is configured to match on DMAC/DIP, this field is the Destination IP address. DSCP: Diffserv Code Point (DSCP) values: Specific value Range of values Any Values are in the range 0-63 including BE, CS1-CS7, EF or AF11-AF43.
IPv6 – TCP/UDP Parameters
Sport: Source TCP/UDP port values: Specific: Value: (0-65535) Any Set a specific or port range applicable for IP protocol TCP/UDP. Dport: Destination TCP/UDP port values: Specific: Value: (0-65535) Any Set a specific or port range applicable for IP protocol TCP/UDP. Action Parameters CoS: Class of Service values: (0-7) or “Default”
SMB - CLI UM
Rev: 1.1
Page 183 of 275
www.amphenol-socapex.com
Tel : +33(0)4.50.89.28.00
Made with FlippingBook interactive PDF creator