IP Address Set or show the destination IP Address.
Ping Length Set or show the payload size of the ICMP packet. Values range from 2 bytes to 1452 bytes. Ping Count Set or show the count of the ICMP packet. Values range from 1 time to 60 times. Ping Interval Set or show the interval of the ICMP packet. Values range from 0 second to 30 seconds. Egress Interface (Only for IPv6) Set or show the VLAN ID (VID) of the specific egress IPv6 interface where the ICMP packet goes. The given VID ranges from 1 to 4094 and will be effective only when the corresponding IPv6 interface is valid. When the egress interface is not given, PING6 finds the best match interface for destination. Do not specify egress interface for loopback address. Do specify egress interface for link-local or multicast address.
6.1.2
ICMP Ping Buttons
Click to start transmitting ICMP packets
Click to re-start diagnostics with PING
SMB - CLI UM
Rev: 1.1
Page 260 of 275
www.amphenol-socapex.com
Tel : +33(0)4.50.89.28.00
Made with FlippingBook interactive PDF creator