QoS QCE Set the QoS Control Entry according to Source or Destination MAC address. The parameters are: addr: setup address match mode source: Match SMAC and SIP (default) destination: Match DMAC and DIP Syntax: qos qce { [ addr { source | destination } ] }*1
QoS Queue-Shaper Queue Set the queue-shaper configuration. The parameters are: <queue>: specify queue or range, values are 1-7 <rate>: shaper rate in kbps, values are 100-3,300,000 [ excess ]: allow use of excess bandwidth Syntax: qos queue-shaper queue <queue> <rate> [ excess ] QoS Shaper Set the QoS shaper configuration. The parameters are: <rate>: Shaper rate in kbps, values are 100-3,300,000 Syntax: qos shaper <rate> QoS WRR Set the Weighted Round Robin configuration. The parameters are: <w0> <w1> <w2> <w3> <w4> <w5>: weight for queue n, values can be from 1 to 100 Syntax: qos wrr <w0> <w1> <w2> <w3> <w4> <w5> (Interface – Port Type) Shutdown Use the shutdown command to shut down the interface. Syntax: shutdown
2.3.16.22
SMB - CLI UM
Rev: 1.1
Page 35 of 275
www.amphenol-socapex.com
Tel : +33(0)4.50.89.28.00
Made with FlippingBook interactive PDF creator