2.3.16.23
(Interface – Port Type) SNMP-Server Host Set SNMP host’s configurations. <conf_name>: name of the host configuration traps: enable traps [linkdown]: link down event [linkup]: link up event [lldp]: LLDP event Syntax: snmp-server host <conf_name> traps [ linkup ] [ linkdown ] [ lldp ]
2.3.16.24
(Interface – Port Type) Spanning-Tree Set the spanning tree protocol mode per interface. auto-edge: auto detect edge status bpdu-guard: enable/disable BPDU guard edge: edge port link-type: port link-type auto: auto detect point-to-point: forced to point-to-point shared: forced to shared restricted-role: port role is restricted (never root port) restricted-tcn: restrict topology change notifications Syntax: spanning-tree
spanning-tree auto-edge spanning-tree bpdu-guard spanning-tree edge spanning-tree link-type { point-to-point | shared | auto }
spanning-tree restricted-role spanning-tree restricted-tcn
2.3.16.25
(Interface – Port Type) Speed Configures interface speed. If you use 10, 100, or 1000 keywords with the auto keyword the port will only advertise the specified speeds. Values are: 10: 10Mbps 100: 100Mbps 1000: 1Gbps Auto: auto negotiation Syntax: speed { 10g | 2500 | 1000 | 100 | 10 | auto { [ 10 ] [ 100 ] [ 1000 ] } }
SMB - CLI UM
Rev: 1.1
Page 36 of 275
www.amphenol-socapex.com
Tel : +33(0)4.50.89.28.00
Made with FlippingBook interactive PDF creator