2.3.16.26
(Interface – Port Type) Switchport Set VLAN characteristics.
Switchport Access VLAN Set VLAN access mode characteristics of the interface. Requires the following parameter: vlan: Set VLAN when interface is in access mode, enter the pvid: <pvid>: VLAN ID of the VLAN when this port is in access mode Syntax: switchport access vlan <pvid> Switchport Forbidden VLAN Add or remove forbidden VLANs from the current list of forbidden VLANs. The parameters are: <vlan_list>: VLAN IDs add/remove: add to or remove from the existing list Syntax: switchport forbidden vlan { add | remove } <vlan_list> Switchport Hybrid Acceptable-Frame-Type Set acceptable frame type on a port. Values are: all: allow all frames tagged: allow only tagged frames untagged: allow only untagged frames Syntax: switchport hybrid acceptable-frame-type { all | tagged | untagged } Switchport Hybrid Allowed VLAN Set allowed VLAN characteristics when interface is in hybrid mode. Values are: <vlan_list> VLAN IDs of the allowed VLANs when this port is in hybrid mode all: all VLANs none: no VLANs add: add VLANs to the current list remove: remove VLANs from the current list except: all VLANs except the following Syntax: switchport hybrid allowed vlan { all | none | [ add | remove | except ] <vlan_list> }
SMB - CLI UM
Rev: 1.1
Page 37 of 275
www.amphenol-socapex.com
Tel : +33(0)4.50.89.28.00
Made with FlippingBook interactive PDF creator