<t>
transmit time in seconds, values are 1-10
2.3.24
Mac Set MAC table entries and configuration. Mac Address-Table Ageing Time Set MAC address ageing time. Syntax: mac address-table aging-time <v_0_10_to_1000000> aging-time Mac address aging time <v_0_10_to_1000000> aging time in seconds, values are 0 - disables aging 10 to 1,000,000 Mac Address-Table Static Set static MAC address. Syntax: mac address-table static <v_mac_addr> vlan <v_vlan_id> interface ( <port_type> [ <v_port_type_list> ] ) <v_mac_addr> 48 bit MAC address: xx:xx:xx:xx:xx:xx <v_vlan_id>: Vlan ID interface <port_type>, values are: * All switches or all ports GigabitEthernet:
set specific Gigabit Ethernet Port number
<v_port_type_list>: port list in 1/1-8 (monitor source)
2.3.25
Monitor Set monitor configuration for port mirroring. The destination port is the port that traffic should be mirrored to. The source port(s) is the port(s) to be mirrored. (It will be mirrored to the destination port.) Syntax: monitor destination interface <port_type> <in_port_type> monitor source { { interface ( <port_type> [ <v_port_type_list> ] ) } | { cpu [ <cpu_switch_range> ] } } { both | rx | tx } interface <port_type>, values are: * All switches or all ports GigabitEthernet: set specific Gigabit Ethernet Port number <in_port_type>: port list in 1/1-8 (monitor destination) <v_port_type_list>: port list in 1/1-8 (monitor source) both: setting source port to both will mirror both ingress and egress traffic
SMB - CLI UM
Rev: 1.1
Page 44 of 275
www.amphenol-socapex.com
Tel : +33(0)4.50.89.28.00
Made with FlippingBook interactive PDF creator