level: set the level, values are: auth:
authNoPriv Security Level noauth: noAuthNoPriv Security Level priv: authPriv Security Level
<view_name>: view name, value can be 1 to 255 characters (read) <write_name>: write name, value can be 1 to 255 characters (write)
2.3.31.2
SNMP-Server Community SNMP v2c Set the SNMP community (SNMPv2c) configuration. Syntax: snmp-server community v2c <comm> [ ro | rw ] <comm>:
community name, value can be 1 to 32 characters
ro:
read only
rw:
read write
2.3.31.3
SNMP-Server Community SNMP v3 Set the SNMP community (SNMPv3) configuration. Syntax: snmp-server community v3 <v3_comm> [ <v_ipv4_addr> <v_ipv4_netmask> ] <v3_comm> : community name, value can be 1 to 127 characters <v_ipv4_addr>: IPv4 address
2.3.31.4
SNMP-Server Contact Set the SNMP server's contact string. snmp-server contact <v_line255> <v_line255>:
contact string, value can be from 1 to 255 characters
2.3.31.5
SNMP-Server Engine-Id Local Set SNMP local engine ID. Syntax: snmp-server engine-id local <engineID> <engineID>: local engine-id, value can be from 10 to 32 characters
2.3.31.6
SNMP-Server Host Set SNMP host’s configurations. Syntax: snmp-server host <conf_name> <conf_name>
name of the host configuration, value can be from 1 to 32
characters
Example: Input: AMP8MG(config)# snmp-server host miltech_host
SMB - CLI UM
Rev: 1.1
Page 52 of 275
www.amphenol-socapex.com
Tel : +33(0)4.50.89.28.00
Made with FlippingBook interactive PDF creator