2.3.35
Vlan VLAN commands. Vlan_List Syntax: vlan <vlist> Example: Input: AMP8MG(config)# vlan 1 Output ( change to VLAN Prompt) AMP8MG(config-vlan)# do:
to run exec commands in config mode
end:
go back to EXEC mode
exit:
exit from current mode
help:
description of the interactive help system
name:
ASCII name of the VLAN, value can be up to 32 characters Syntax: name <vlan_name>
no:
clear the VLAN name Syntax: no name
Vlan Ethertype Set the ether type for Custom S-ports. Syntax: vlan ethertype s-custom-port <etype> <etype>: ethertype (Range: 0x0600-0xffff)
2.4
Copy
Copy one of the following source file types to a specified destination: running-config: currently running configuration startup-config: startup configuration <source_path>/<destination_path>: flash:filename: file in FLASH or on TFTP server [syntax-check]: Perform syntax check on source configuration Syntax: copy { startup-config | running-config | <source_path> } { startup- config | running-config | <destination_path> } [ syntax-check ]
SMB - CLI UM
Rev: 1.1
Page 58 of 275
www.amphenol-socapex.com
Tel : +33(0)4.50.89.28.00
Made with FlippingBook interactive PDF creator