2.3.33.4
Spanning-Tree Mode Set the STP (Spanning Tree Protocol) protocol mode. Syntax: spanning-tree mode { stp | rstp | mstp } rstp: Rabid Spanning Tree (802.1w) stp: 802.1D Spanning Tree mstp: Multiple Spanning Tree (802.1s)
2.3.33.5
Spanning-Tree Recovery Interval Set the error recovery timeout. Syntax: spanning-tree recovery interval <interval> <interval>: the interval in seconds, value can be 30 to 86,400 seconds
2.3.33.6
Spanning-Tree transmit Hold-Count Set the number of BPDUs to transmit. Syntax: spanning-tree transmit hold-count <holdcount> <holdcount> :
the maximum number of transmit BPDUs per sec, value can be
from 1 to 10 per second, the default is 6 per second
2.3.34
Thermal-Protect Set the thermal protection configurations.
Thermal-Protect Prio Assign a temperature limit to the priority. Ports will shut off when they reach the temperature limit assigned to their priority. Syntax: thermal-protect prio <prio_list> temperature <new_temp> <prio_list>: prioity or priorities, value can be from 0 to 3 <new_temp>: temperature at which to turn off a port (with the corresponding priority)
SMB - CLI UM
Rev: 1.1
Page 57 of 275
www.amphenol-socapex.com
Tel : +33(0)4.50.89.28.00
Made with FlippingBook interactive PDF creator