4.7
Thermal Protection Configuration
This page allows the user to inspect and configure the current setting for controlling thermal protection. Thermal protection is used to protect the chip from getting overheated. When the temperature exceeds the configured thermal protection temperature, ports will be turned off in order to decrease the power consumption. Each port is assigned a priority. Each priority is assigned a temperature at which the corresponding ports shall be turned off.
4.7.1
Temperature Settings for Priority Groups Set or show the temperature at which the ports with the corresponding priority will be turned off. Temperatures between 0°C and 255°C are supported.
4.7.2
Port Priorities The priority the port belongs to. 4 priorities are supported. (The default priority is 0) Thermal Protection Configuration Buttons Save: Click to save all changes Reset:
4.7.3
Click to undo any changes made locally and revert to previously saved values
SMB - CLI UM
Rev: 1.1
Page 82 of 275
www.amphenol-socapex.com
Tel : +33(0)4.50.89.28.00
Made with FlippingBook interactive PDF creator