4.8
Ports
This page displays the current port configurations.
4.8.1
Port Configuration The user can configure the following port parameters: Port This column displays the logical port number for this row.
Link The current link state is displayed graphically. Green indicates the link is up and red that it is down. Speed - Current This column displays the current link speed of the port. Speed - Configured The user can select any available link speed for the given switch port. Only speeds supported by the specific port are shown. Possible speeds are: Disabled - Disables the switch port operation. Auto - Port auto negotiating speed with the link partner and selects the highest speed that is compatible with the link partner.
10Mbps HDX - Forces the cu port in 10Mbps half duplex mode. 10Mbps FDX - Forces the cu port in 10Mbps full duplex mode. 100Mbps HDX - Forces the cu port in 100Mbps half duplex mode. 100Mbps FDX - Forces the cu port in 100Mbps full duplex mode. 1Gbps FDX - Forces the port in 1Gbps full duplex
SMB - CLI UM
Rev: 1.1
Page 83 of 275
www.amphenol-socapex.com
Tel : +33(0)4.50.89.28.00
Made with FlippingBook interactive PDF creator