4.11
Security – Switch – HTTPS
The user can configure HTTPS from this page.
4.11.1
HTTPS Configuration The HTTPS configuration has the following parameters:
Mode Set or show the HTTPS operation mode. This mode allows the user to disable HTTPS even when the current connection is HTTPS. Possible modes are: Enabled: Enable HTTPS mode operation. Disabled: Disable HTTPS mode operation - operation will automatically redirect the web browser to an HTTP connection. (This is the default mode.) Automatic Redirect Set or show the HTTPS redirect operation mode. Automatic Redirect is only available when HTTPS mode is enabled. Enabled: Enable HTTPS redirect mode operation, to automatically redirect web browser to an HTTPS Disabled: Disable HTTPS redirect mode operation (This is the default.)
4.11.2
HTTPS Buttons Save:
Click to save all changes
Reset:
Click to undo any changes made locally and revert to previously saved values
SMB - CLI UM
Rev: 1.1
Page 87 of 275
www.amphenol-socapex.com
Tel : +33(0)4.50.89.28.00
Made with FlippingBook interactive PDF creator