Read Community Set or show the community read access string to permit access to SNMP agent. The allowed string length is 0 to 255, and the allowed content is the ASCII characters from 33 to 126. Applicable Only to SNMP versions: SNMPv1 or SNMPv2c If SNMP version is SNMPv3, the community string will be associated with SNMPv3 communities table. It provides more flexibility to configure security name than a SNMPv1 or SNMPv2c community string. In addition to community string, a particular range of source addresses can be used to restrict source subnet. Write Community Set or show the community write access string to permit access to SNMP agent. The allowed string length is 0 to 255, and the allowed content is the ASCII characters from 33 to 126. Applicable Only to SNMP versions: SNMPv1 or SNMPv2c If SNMP version is SNMPv3, the community string will be associated with SNMPv3 communities table. It provides more flexibility to configure security name than a SNMPv1 or SNMPv2c community string. In addition to community string, a particular range of source addresses can be used to restrict source subnet. Engine ID Set or show the SNMPv3 engine ID. The string must contain an even number (in hexadecimal format) with number of digits between 10 and 64, but all-zeros and all-’F’s are not allowed. Change of the Engine ID will clear all original local users. Applicable Only to SNMP version: SNMPv3
4.13.2
SNMP System Configuration Buttons Save: Click to save all changes Reset:
Click to undo any changes made locally and revert to previously saved values
SMB - CLI UM
Rev: 1.1
Page 91 of 275
www.amphenol-socapex.com
Tel : +33(0)4.50.89.28.00
Made with FlippingBook interactive PDF creator