Wall Cases
Installing Wall Case Inside Corner Fillers Inside corner fillers are commonly used where two wall cases come together in a corner. Please note that the installer will want to install the front angle of an inside corner filler before securing the wall cases to the wall. This will allow the wall cases to repositioned, if necessary, to accept the corner filler. Steps: 1. Using # 8 sheet metal screws, attach filler clips along the front edge the wall case (vertically), as shown below. Install two clips for 24” and 30” high wall cases; install three clips for 36” and 48” high units. Also, attach one filler clip each along the top and bottom edges of the wall case. 2. Slide the front angle of the inside corner filler into the filler clips for one of the two cabinets, as shown below. The angle will slide into place with a friction fit only. No additional fasteners are required. 3. Move the second wall case to the front angle. Connect front angle into the filler clips on the second cabinet. Each of the wall cases may need to be shifted slightly from side-to-side to accomplish this. 4. Slide the top and bottom caps into the filler clips.
1
Attach filler clip along the front, top and bottom edges.
2
Slide the inside corner filler into the filler clips on the respective cabinets.
3
Slide the top and bottom pans into the filler clips
22
Made with FlippingBook interactive PDF creator