Titan Frames with Wall Cabinets
Titan Frame Wall Cabinet Installation Each wall case unit is equipped with a separate “wall hanging bracket.” The upper, rear, horizontal frame member at the back of each wall case unit is formed to slide onto this wall hanging bracket. Steps: 1. The wall hanging bracket should be secured to the titan frame system at the proper height. 2. After the wall hanging bracket is securely in place, position the wall case slightly above the bracket and flush against the titan frame. Gently slide the wall case down over the offset of the wall hanging bracket. 3. To ensure stability, screw or bolt the wall case (through the cabinet body) into the titan frame. The wall hanging bracket is an alignment aid and support which must be supplemented with additional fasteners to prevent the unit from accidentally being raised off of the bracket.
1
Secure the hanging brackets to the titan frame
2
Attach the wall case hanger bracket to the top frame bracket
3
Slide the wall case onto the wall hanging bracket and screw or bolt the wall case to the titan frame.
23
Made with FlippingBook interactive PDF creator