Floor Cases
Floor Case Installation To prevent tipping, floor case units must be secured to a wall or otherwise supported vertically. After leveling the units, install fasteners through the inside of the cabinet, near the corners if possible, into the wall. At least three fasteners per side is recommended. CAUTION: Install a filler block of wood in the cavity behind the floor case, where the fasteners will go into the wall, to keep the cabinet’s back flat and free of dimples.
Removing Floor Case Sliding Doors Please see the procedures to the left for removing wall case sliding doors. The procedures are the same for floor case sliding doors.
Wall
Install fastener through cabinet into wall
24
Made with FlippingBook interactive PDF creator