® A Gorman-Rupp Company Straight Centrifugal Pumps
Pump Dimensional & Specification Data
Full Load Amps SUC* DIS* A**
‡ Ship Wt. (Lbs.)
Voltage @ 60 Hz +
Model ‡ Curve HP PH ENC
B**
C** D E F
L**
W** H
5022
1 TEFC 115-208/230 12/6
54
5.1 [13.0]
14.6 [37.1]
A
1
5023
3 TEFC 208-230/460 4/2
54
N/A
13.6 [34.5]
0.1 [0.3]
7.1 [18.0]
1.6 [4.0]
3.3 [8.5]
9.7 [24.7]
8.4 [21.2]
1-1/4 1
5020
1 TEFC 115-208/230 22/11
55
5.1 [13.0]
15.1 [38.3]
B 1-1/2
5021
3 TEFC 208-230/460 6/3
55
N/A
15.1 [38.3]
5.4 [13.8]
Voltage @ 60 Hz +
‡ Ship Wt. (Lbs.) 65
Full Load Amps
Model ‡ 5032
1 TEFC 115-208/230 28/14
5.0 [12.7]
15.3 [38.9]
Curve
8.2 [20.8] 10.0 [25.4] 10.0 [25.4] Maximum Solids Handling Capacity: 1/8” Diameter 14.0 [35.5] 14.7 [37.3] 14.2 [36.0] L** 8.6 [21.8] 8.6 [21.8] 8.6 [21.8] W** H 43 51 43 3.4 [8.6] 10.0 [25.4] 8.9 [22.7] 15.1 [38.3] 65 15.8 [40.1] 74 15.9 [40.3] 74
HP PH ENC
SUC* DIS* A**
B**
C**
D E
F
C
2
5033
3 TEFC 208-230/460 7/4
N/A
7.4 [18.9] 0.2 [0.6] 2.1 [5.3] 3.3 [8.5] 7.4 [18.9] 0.2 [0.6] 2.1 [5.3] 3.3 [8.5] 5.0 [12.7] 7.4 [18.9] 0.2 [0.6] 2.1 [5.3] 3.3 [8.5] N/A 6.6 [16.7] 0.4 [1.1] 1.5 [3.8]
4893 489C 489D
5.1 [13.0] 5.1 [13.0] N/A
115/230 115/230 230/460
1/2 1 ODP
10/5 1¼ 1 N/A 9/5 1¼ 1 5.4 [13.8] 16 3/2 1¼ 1 5.4 [13.8]
1-1/2 1-1/4
5030
1 TEFC 208/230
A
3/4 1 TEFC 3/4 3 TEFC 3
D
5031
3 TEFC 208-230/460 8/4
(*) Standard NPT (Female) pipe thread. (**) This dimension may vary due to motor manufacturer's specifications. (+) 3-Phase motors can also operate on 50 Hz. (This will change full load amps, service factor and RPM) NOTE:Dimensions are in inches (centimeters) and have a tolerance of ± 1/4". NOTE:Electric supply for ALL motors must be within ±10% of nameplate voltage rating (e.g.230V ±10%= 207 to 253).
W**
A**
E
B**
‡ When Ordering, Add the Correct (-9X) Suffix to Model Number Indicating Material Selection (Ex. 5023-95) XCI (-95) Cast Iron Construction with Viton ® Seals XSS (-98) Cast Stainless Steel Construction with Viton ® Seals (All Models Come Standard with Stainless Steel Impeller)
DISCHARGE*
F
SUCTION*
H
3.5 8.9
0.3 0.9
2.4 6.1
D
L** 3.0 7.6
C**
Model
Suction* Discharge*
A**
B**
C**
D
E
F
L**
W**
H
5020 5021 5022 5023 5030 5031
5.1 [13.0]
15.1 [38.3] 15.1 [38.3] 14.6 [37.1] 13.6 [34.5] 15.8 [40.1] 15.9 [40.3] 15.3 [38.9] 15.1 [38.3]
N/A Standard Features
1-1/4
1
7.1 [18.0] 0.1 [0.3] 1.6 [4.0]
3.3 [8.5]
9.7 [24.7] 8.4 [21.2]
5.1 [13.0]
N/A
5.4 [13.8] • Stainless Steel, and Cast Iron Construction • Viton ® Silicon Carbide Mechanical Seal and O-ring • Optional EPDM/EPR Mechanical Seals Available • Stainless Steel Motor Shaft and Hardware • NEMA TEFC Single or Three Phase 3450 RPM Motors • NEMA Base Mounted Motor 1 - 1/2 1 - 1/4 5032 5033
6.6 [16.7] 0.4 [1.1] 1.5 [3.8] • Stainless Steel Impeller • Discharge Rotates in 90° Increments • Maximum Working Pressure 150 PSI • Maximum Temperature 200° F 3.4 [8.6]
5.0 [12.7]
N/A
10.0 [25.4] 8.9 [22.7]
5.0 [12.7]
N/A
• (3) Front Drain Plugs, Located 90° Apart • QSP – Quick Ship Pump for Many Models
DO NOT SCALE DRAWING
DIMENSION AMT PUMP ROYERSFOR
FIRST USED:
TOLERANCES NOTED EXCEPT AS
A Subsidiary of The Gorman-Rupp Company
TM
TITLE:
DECIMAL
DRAWING NUMBER Elevation
.XX ± .010 [.30] .XXX ± .005 [.15] FRACTIONAL ±1/64
502/50
REFERENCE:
Hazardous Duty/Xplosion Proof motors available from stock ranging from 1 to 10 HP; CALL FOR QUOTATION & LEAD TIME!
DRAWN BY DHU 5030-EL0-X0 2/5/2021
NOT TO BE USED IN ANY THIS COMPANY WAY DETRIMENTAL TO PUMP COMPANY AND IS PROPERTY OF AMT THIS PRINT IS THE
DATE SCALE
ANGULAR ±1/2°
DATE
APPROVED BY
ISSUE
REV
DESCRIPTION OF CHANGE
ECO BY
DATE
Manufacturer of AMT & IPT Pumps 400 Spring Street • Royersford, PA 19468 USA
®
www.amtpump.com • 888-amt-pump (268-7867) The Gorman-Rupp Company reserves the right to discontinue any model or change specifications at any time without incurring any obligation. ©2012 American Machine and Tool Company. All rights reserved.
A Gorman-Rupp Company
1212 0221
STE-10
Made with FlippingBook Learn more on our blog