Crown Paints M60 Master Specification

MASTER M60 SPECIFICATION M60 Painting/clearfinishing 110AScrubbablematt emulsion paint 1. Description: new walls and/or ceilings 2. Manufacturer: Crown Trade fromCrown Paints 2.1. Product reference: Crown Trade Clean Extreme Stain Resistant Scrubbable Matt 3. Surfaces: Interior masonry as identified 3.1. Preparation: All surfaces should be clean, sound, dry and free from anything that could affect the adhesion of thematerials to be applied. Refer clauses 400-711A as appropriate 4. Initial coats: Crown Trade Clean Extreme Stain Resistant Scrubbable Matt thinned 40%with clean water 4.1. Number of coats: ONE 5. Finishing coats: Crown Trade Clean Extreme Stain Resistant Scrubbable Matt 5.1. Number of coats: TWO 110B Scrubbable eggshell emulsion paint 1. Description: new walls and/or ceilings 2. Manufacturer: Crown Trade fromCrown Paints 2.1. Product reference: Crown Trade Clean Extreme Stain Resistant Acrylic Eggshell 3. Surfaces: Interior masonry as identified 3.1. Preparation: All surfaces should be clean, sound, dry and free from anything that could affect the adhesion of thematerials to be applied. Refer clauses 400-711A as appropriate 4. Initial coats: Crown Trade Clean Extreme Stain Resistant Acrylic Eggshell thinned 40%with clean water 4.1. Number of coats: ONE 5. Finishing coats: Crown Trade Clean Extreme Stain Resistant Acrylic Eggshell 5.1. Number of coats: TWO 110CMould inhibitingmatt emulsion paint 1. Description: new walls and/or ceilings scrubbable finish 2. Manufacturer: Crown Trade fromCrown Paints 2.1. Product reference: Crown Trade Clean Extreme Mould Inhibiting Scrubbable Matt 3. Surfaces: Interior masonry as identified 3.1. Preparation: All surfaces should be clean, sound, dry and free from anything that could affect the adhesion of thematerials to be applied. Refer clauses 400-651 as appropriate 4. Initial coats: Crown Trade Clean Extreme Mould Inhibiting Scrubbable Matt thinned 40%with clean water 4.1. Number of coats: ONE 5. Finishing coats: Crown Trade Clean Extreme Mould Inhibiting Scrubbable Matt 5.1. Number of coats: TWO

It’s not just paint.

M60 Master – Crown Paints Master M60 Specification – M60 Master

Clause

Surfaces & Condition

Pages

110 111 130 131 132 133 150 151 152 153 160 161 162 163 164 165 166 167 168 169 170 171 176 177 180 181 182 183

Interior walls & ceilings- New Interior walls & ceilings- Painted Interior Gloss Trim- New/uncoated

1-4 5-8

9-14

Interior Gloss Trim- Painted

15-19 20-28 29-35 36-42 43-48 49-55 55-59

Exterior Gloss Trim- New/uncoated

Exterior Gloss Trim- Painted

Interior Satin Trim- New/uncoated

Interior Satin Trim- Painted

Exterior Satin Trim- New/uncoated

Exterior Satin Trim- Painted Interior clear finish- New Interior clear finish- Coated

60 61

Exterior clear/translucent finish- New Exterior clear/translucent finish- Coated

62-63 64-65 66-68 69-70 71-72 73-74 75-76 77-78 79-81 82-84 85-87 88-89 90-91 92-93

Shed & Fence- New Shed & Fence- Coated

Exterior opaque woodstain- New Exterior opaque woodstain- Coated

Decking- New

Decking- Treated

Exterior masonry- New/uncoated

Exterior masonry- Painted Protective coatings- New

Protective coatings- Painted Concrete floors- New/Unpainted Concrete floors- Painted Wood floors- New/Uncoated

94 95 96

Wood floors- Coated

General

Preparation Application

97-101 102-104

0

M60 Master – Crown Paints Master M60 Specification – M60 Master

M60 Painting/clear finishing

110A Scrubbable matt emulsion paint 1. Description: new walls and/or ceilings 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Clean Extreme Stain Resistant Scrubbable Matt 3. Surfaces: Interior masonry as identified 3.1. Preparation: All surfaces should be clean, sound, dry and free from anything that could affect the adhesion of the materials to be applied. Refer clauses 400-711A as appropriate 4. Initial coats: Crown Trade Clean Extreme Stain Resistant Scrubbable Matt thinned 40% with clean water 4.1. Number of coats: ONE 5. Finishing coats: Crown Trade Clean Extreme Stain Resistant Scrubbable Matt 5.1. Number of coats: TWO 110B Scrubbable eggshell emulsion paint 1. Description: new walls and/or ceilings 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Clean Extreme Stain Resistant Acrylic Eggshell 3. Surfaces: Interior masonry as identified 3.1. Preparation: All surfaces should be clean, sound, dry and free from anything that could affect the adhesion of the materials to be applied. Refer clauses 400-711A as appropriate 4. Initial coats: Crown Trade Clean Extreme Stain Resistant Acrylic Eggshell thinned 40% with clean water 4.1. Number of coats: ONE 5. Finishing coats: Crown Trade Clean Extreme Stain Resistant Acrylic Eggshell 5.1. Number of coats: TWO 110C Mould inhibiting matt emulsion paint 1. Description: new walls and/or ceilings scrubbable finish 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Clean Extreme Mould Inhibiting Scrubbable Matt 3. Surfaces: Interior masonry as identified 3.1. Preparation: All surfaces should be clean, sound, dry and free from anything that could affect the adhesion of the materials to be applied. Refer clauses 400-651 as appropriate 4. Initial coats: Crown Trade Clean Extreme Mould Inhibiting Scrubbable Matt thinned 40% with clean water 4.1. Number of coats: ONE 5. Finishing coats: Crown Trade Clean Extreme Mould Inhibiting Scrubbable Matt 5.1. Number of coats: TWO

1

M60 Master – Crown Paints Master M60 Specification – M60 Master

110D Mould inhibiting eggshell emulsion paint 1. Description: new walls and/or ceilings scrubbable finish 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Clean Extreme Mould Inhibiting Acrylic Eggshell 3. Surfaces: Interior masonry as identified 3.1. Preparation: All surfaces should be clean, sound, dry and free from anything that could affect the adhesion of the materials to be applied. Refer clauses 400-711A as appropriate 4. Initial coats: Crown Trade Clean Extreme Mould Inhibiting Acrylic Eggshell thinned 40% with clean water 4.1. Number of coats: ONE 5. Finishing coats: Crown Trade Clean Extreme Mould Inhibiting Acrylic Eggshell 5.1. Number of coats: TWO 110E Anti-bacterial matt emulsion paint 1. Description: new walls and/or ceilings scrubbable finish 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Clean Extreme Anti-Bacterial Scrubbable Matt 3. Surfaces: Interior masonry as identified 3.1. Preparation: All surfaces should be clean, sound, dry and free from anything that could affect the adhesion of the materials to be applied. Refer clauses 400-711A as appropriate 4. Initial coats: Crown Trade Clean Extreme Anti-Bacterial Scrubbable Matt thinned 40% with clean water 4.1. Number of coats: ONE 5. Finishing coats: Crown Trade Clean Extreme Anti-Bacterial Scrubbable Matt 5.1. Number of coats: TWO 110F Anti-bacterial eggshell emulsion paint 1. Description: new walls and/or ceilings scrubbable finish 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Clean Extreme Anti-Bacterial Acrylic Eggshell 3. Surfaces: Interior masonry as identified 3.1. Preparation: All surfaces should be clean, sound, dry and free from anything that could affect the adhesion of the materials to be applied. Refer clauses 400-711A as appropriate 4. Initial coats: Crown Trade Clean Extreme Anti-Bacterial Acrylic Eggshell thinned 40% with clean water 4.1. Number of coats: ONE 5. Finishing coats: Crown Trade Clean Extreme Anti-Bacterial Acrylic Eggshell 5.1. Number of coats: TWO

2

M60 Master – Crown Paints Master M60 Specification – M60 Master

110G Vinyl matt emulsion paint 1. Description: new walls and/or ceilings

2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Matt Vinyl 3. Surfaces: Interior masonry as identified

3.1. Preparation: All surfaces should be clean, sound, dry and free from anything that could affect the adhesion of the materials to be applied. Refer clauses 400-711A as appropriate 4. Initial coats: Crown Trade Matt Vinyl thinned 40% with clean water 4.1. Number of coats: ONE 5. Finishing coats: Crown Trade Matt Vinyl 5.1. Number of coats: TWO 110H Acrylic eggshell emulsion paint 1. Description: new walls and/or ceilings 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Acrylic Eggshell 3. Surfaces: Interior masonry as identified 3.1. Preparation: All surfaces should be clean, sound, dry and free from anything that could affect the adhesion of the materials to be applied. Refer clauses 400-651 as appropriate 4. Initial coats: Crown Trade Acrylic Eggshell thinned 40% with clean water 4.1. Number of coats: ONE 5. Finishing coats: Crown Trade Acrylic Eggshell 5.1. Number of coats: TWO 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Silk Vinyl 3. Surfaces: Interior masonry as identified 3.1. Preparation: All surfaces should be clean, sound, dry and free from anything that could affect the adhesion of the materials to be applied. Refer clauses 400-711A as appropriate 4. Initial coats: Crown Trade Covermatt Drywall Primer 4.1. Number of coats: ONE 5. Finishing coats: 5.1. Number of coats: TWO Crown Trade Silk Vinyl Description: new walls and/or ceilings . 1 110 I Vinyl silk emulsion paint

3

M60 Master – Crown Paints Master M60 Specification – M60 Master

110J Mid sheen emulsion paint 1. Description: new walls and/or ceilings

2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Mid Sheen 3. Surfaces: Interior masonry as identified

3.1. Preparation: All surfaces should be clean, sound, dry and free from anything that could affect the adhesion of the materials to be applied. Refer clauses 400-711A as appropriate 4. Initial coats: Crown Trade Covermatt Drywall Primer 4.1. Number of coats: ONE 5. Finishing coats: Crown Trade Mid Sheen 5.1. Number of coats: TWO

110K Contract quality matt emulsion paint 1. Description: new walls and/or ceilings- mist coat 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Covermatt 3. Surfaces: Interior masonry as identified

3.1. Preparation: All surfaces should be clean, sound, dry and free from anything that could affect the adhesion of the materials to be applied. Refer clauses 400-651 as appropriate 4. Initial coats: Crown Trade Covermatt thinned 40% with clean water 4.1. Number of coats: ONE 5. Finishing coats: Crown Trade Covermatt 5.1. Number of coats: TWO

110L Contract quality matt emulsion paint 1. Description: new walls and/or ceilings- drywall primer 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Covermatt 3. Surfaces: Interior masonry as identified

3.1. Preparation: All surfaces should be clean, sound, dry and free from anything that could affect the adhesion of the materials to be applied. Refer clauses 400-711A as appropriate 4. Initial coats: Crown Trade Covermatt Drywall Primer 4.1. Number of coats: ONE 5. Finishing coats: Crown Trade Covermatt 5.1. Number of coats: TWO

4

M60 Master – Crown Paints Master M60 Specification – M60 Master

111A Scrubbable matt emulsion paint Description: existing painted walls and/or ceilings 1. Manufacturer: Crown Trade from Crown Paints 1.1. Product reference: Crown Trade Clean Extreme Stain Resistant Scrubbable Matt 2. Surfaces: Interior surfaces as identified 2.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-711A as appropriate 3. Initial coats: Patch prime bare and/or filled areas, or residual stains, with Crown Trade PX3 All Purpose Primer (Solvent Borne) or Crown Trade PX4 All Purpose Primer (Water Borne). 3.1. Number of coats: ONE (TWO coats for PX4 over stained surfaces only) 4. Bring forward: Bring forward patch primed areas with Crown Trade Clean Extreme Stain Resistant Scrubbable Matt 4.1. Number of coats: ONE 5. Finishing coats: Crown Trade Clean Extreme Stain Resistant Scrubbable Matt 5.1. Number of coats: TWO 111B Scrubbable eggshell emulsion paint 1. Description: existing painted walls and/or ceilings 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Clean Extreme Stain Resistant Acrylic Eggshell 3. Surfaces: Interior surfaces as identified 3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-711A as appropriate 4. Initial coats: Patch prime bare and/or filled areas, or residual stains, with Crown Trade PX3 All Purpose Primer (Solvent Borne) or Crown Trade PX4 All Purpose Primer (Water Borne). 4.1. Number of coats: ONE (TWO coats for PX4 over stained surfaces only) 5. Bring forward: Bring forward patch primed areas with Crown Trade Clean Extreme Stain Resistant Acrylic Eggshell 5.1. Number of coats: ONE 6. Finishing coats: Crown Trade Clean Extreme Stain Resistant Acrylic Eggshell 6.1. Number of coats: TWO 111C Mould inhibiting matt emulsion paint 1. Description: existing painted walls and/or ceilings scrubbable finish 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Clean Extreme Mould Inhibiting Scrubbable Matt 3. Surfaces: Interior surfaces as identified 3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-711A as appropriate 4. Initial coats: Patch prime bare and/or filled areas, or residual stains, with Crown Trade PX3 All Purpose Primer (Solvent Borne) or Crown Trade PX4 All Purpose Primer (Water Borne). 4.1. Number of coats: ONE (TWO coats for PX4 over stained surfaces only) 5. Bring forward: Bring forward patch primed areas with Crown Trade Clean Extreme Mould Inhibiting Scrubbable Matt 5.1. Number of coats: ONE 6. Finishing coats: Crown Trade Clean Extreme Mould Inhibiting Scrubbable Matt 6.1. Number of coats: TWO

5

M60 Master – Crown Paints Master M60 Specification – M60 Master

111D Mould inhibiting eggshell emulsion paint 1. Description: existing painted walls and/or ceilings scrubbable finish 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Clean Extreme Mould Inhibiting Acrylic Eggshell 3. Surfaces: Interior masonry as identified 3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-711A as appropriate 4. Initial coats: Patch prime bare and/or filled areas, or residual stains, with Crown Trade PX3 All Purpose Primer (Solvent Borne) or Crown Trade PX4 All Purpose Primer (Water Borne). 4.1. Number of coats: ONE (TWO coats for PX4 over stained surfaces only). 5. Bring forward: Bring forward patch primed areas with Crown Trade Clean Extreme Mould Inhibiting Acrylic Eggshell 5.1. Number of coats: ONE 6. Finishing coats: Crown Trade Clean Extreme Mould Inhibiting Acrylic Eggshell 6.1. Number of coats: TWO 111E Anti-bacterial matt emulsion paint 1. Description: existing painted walls and/or ceilings scrubbable finish 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Clean Extreme Anti-Bacterial Scrubbable Matt 3. Surfaces: Interior surfaces as identified 3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-711A as appropriate 4. Initial coats: Patch prime bare and/or filled areas, or residual stains, with Crown Trade PX3 All Purpose Primer (Solvent Borne) or Crown Trade PX4 All Purpose Primer (Water Borne). 4.1. Number of coats: ONE (TWO coats for PX4 over stained surfaces only). 5. Bring forward: Bring forward patch primed areas with Crown Trade Clean Extreme Anti-Bacterial Scrubbable Matt 5.1. Number of coats: ONE 6. Finishing coats: Crown Trade Clean Extreme Anti-Bacterial Scrubbable Matt 6.1. Number of coats: TWO

6

M60 Master – Crown Paints Master M60 Specification – M60 Master

111F Anti-bacterial eggshell emulsion paint 1. Description: existing painted walls and/or ceilings scrubbable finish 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Clean Extreme Anti-Bacterial Acrylic Eggshell 3. Surfaces: Interior surfaces as identified 3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400/440A-622 as appropriate 4. Initial coats: Patch prime bare and/or filled areas, or residual stains, with Crown Trade PX3 All Purpose Primer (Solvent Borne) or Crown Trade PX4 All Purpose Primer (Water Borne). 4.1. Number of coats: ONE 5. Bring forward: Bring forward patch primed areas with Crown Trade Clean Extreme Anti-Bacterial Acrylic Eggshell 5.1. Number of coats: ONE 6. Finishing coats: Crown Trade Clean Extreme Anti-Bacterial Acrylic Eggshell 6.1. Number of coats: TWO 111G Vinyl matt emulsion paint

1. Description: existing painted walls and/or ceilings 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Matt Vinyl 3. Surfaces: Interior surfaces as identified

3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-711A as appropriate 4. Initial coats: Patch prime bare and/or filled areas, or residual stains, with Crown Trade PX3 All Purpose Primer (Solvent Borne) or Crown Trade PX4 All Purpose Primer (Water Borne).

4.1. Number of coats: ONE (TWO coats for PX4 over stained surfaces only) 5. Bring forward: Bring forward patch primed areas with Crown Trade Matt Vinyl 5.1. Number of coats: ONE 6. Finishing coats: Crown Trade Matt Vinyl 6.1. Number of coats: TWO 111H Acrylic eggshell emulsion paint

1. Description: existing painted walls and/or ceilings 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Acrylic Eggshell 3. Surfaces: Interior surfaces as identified 3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400/440A-622 as appropriate 4. Initial coats: Patch prime bare and/or filled areas, or residual stains, with Crown Trade PX3 All Purpose Primer (Solvent Borne) or Crown Trade PX4 All Purpose Primer (Water Borne). 4.1. Number of coats: ONE (TWO coats for PX4 over stained surfaces only) 5. Bring forward: Bring forward patch primed areas with Crown Trade Acrylic Eggshell 5.1. Number of coats: ONE 6. Finishing coats: Crown Trade Acrylic Eggshell 6.1. Number of coats: TWO

7

M60 Master – Crown Paints Master M60 Specification – M60 Master

111I Vinyl silk emulsion paint 1. Description: existing painted walls and/or ceilings 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Silk Vinyl 3. Surfaces: Interior surfaces as identified

3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-711A as appropriate 4. Initial coats: Patch prime bare and/or filled areas, or residual stains, with Crown Trade PX3 All Purpose Primer (Solvent Borne) or Crown Trade PX4 All Purpose Primer (Water Borne).

4.1. Number of coats: ONE (TWO coats for PX4 over stained surfaces only). 5. Bring forward: Bring forward patch primed areas with Crown Trade Silk Vinyl 5.1. Number of coats: ONE 6. Finishing coats: Crown Trade Silk Vinyl 6.1. Number of coats: TWO 111J Mid sheen emulsion paint

1. Description: existing painted walls and/or ceilings 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Mid Sheen Vinyl 3. Surfaces: Interior surfaces as identified

3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-711A as appropriate 4. Initial coats: Patch prime bare and/or filled areas, or residual stains, with Crown Trade PX3 All Purpose Primer (Solvent Borne) or Crown Trade PX4 All Purpose Primer (Water Borne). 4.1. Number of coats: ONE (TWO coats for PX4 over stained surfaces only). 5. Bring forward: Bring forward patch primed areas with Crown Trade Mid Sheen Vinyl 5.1. Number of coats: ONE 6. Finishing coats: Crown Trade Mid Sheen 6.1. Number of coats: TWO

8

M60 Master – Crown Paints Master M60 Specification – M60 Master

130A Hybrid water borne gloss paint Description: Interior- new or pre-primed timber/mdf 1. Manufacturer: Crown Trade from Crown Paints 1.1. Product reference: Crown Trade Fastflow Quick Dry Gloss 2. Surfaces: New timber/MDF as identified 2.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-770 as appropriate 3. Initial coats: Crown Trade Fastflow Quick Dry Primer Undercoat 3.1. Number of coats: ONE 4. Finishing coats: Crown Trade Fastflow Quick Dry Gloss 4.1. Number of coats: TWO 130B Hybrid water borne gloss paint 1. Description: Interior- new or pre-primed ferrous/non-ferrous metal- excluding new galvanised 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Fastflow Quick Dry Gloss 3. Surfaces: New ferrous & non-ferrous metal, excluding new galvanised 3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-740A as appropriate 4. Initial coats: Crown Trade Protective Coatings High Build Rust Inhibiting Primer Undercoat 4.1. Number of coats: ONE 5. Undercoats: Crown Trade Fastflow Quick Dry Primer Undercoat 5.1. Number of coats: ONE 6. Finishing coats: Crown Trade Fastflow Quick Dry Gloss 6.1. Number of coats: TWO 130C Hybrid water borne gloss paint 1. Description: Interior- new galvanised 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Fastflow Quick Dry Gloss 3. Surfaces: New galvanised 3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-740A as appropriate 4. Initial coats: Pre-treat all cleaned bright galvanising with Crown Trade Protective Coatings T- Wash (as manufacturer’s instructions) then prime with Crown Trade Protective Coatings High

Build Rust Inhibiting Primer Undercoat 4.1. Number of coats: ONE & ONE 5. Undercoats: Crown Trade Fastflow Quick Dry Primer Undercoat 5.1. Number of coats: ONE 6. Finishing coats: Crown Trade Fastflow Quick Dry Gloss 6.1. Number of coats: TWO

9

M60 Master – Crown Paints Master M60 Specification – M60 Master

130D Hybrid water borne gloss paint 1. Description: Interior new or uncoated-pvc-u 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Fastflow Quick Dry Gloss 3. Surfaces: PVC-U as identified

3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-711A as appropriate 4. Initial coats: Crown Trade PX3 All Purpose Primer (solvent borne) or Crown Trade PX4 All Purpose Primer (water borne) to bare surfaces 4.1. Number of coats: ONE 5. Undercoats: Crown Trade Fastflow Quick Dry Primer Undercoat 5.1. Number of coats: ONE 6. Finishing coats: Crown Trade Fastflow Quick Dry Gloss 6.1. Number of coats: TWO 130E New build water borne gloss paint 1. Description: Interior- new or pre-primed timber/mdf 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade New Build Acrylic Gloss 3. Surfaces: New timber/MDF as identified 3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-770 as appropriate 4. Initial coats: Crown Trade New Build Acrylic Primer Undercoat 4.1. Number of coats: ONE 5. Finishing coats: Crown Trade New Build Acrylic Gloss 5.1. Number of coats: TWO 5.2. White ONLY 130F New build water borne gloss paint 1. Description: Interior- new or pre-primed ferrous/non-ferrous metal- excluding new galvanised 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade New Build Acrylic Gloss 3. Surfaces: New ferrous & non-ferrous metal, excluding new galvanised 3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-740A as appropriate 4. Initial coats: Crown Trade Universal Metal Primer. 4.1. Number of coats: ONE 5. Undercoats: Crown Trade New Build Acrylic Primer Undercoat 5.1. Number of coats: ONE 6. Finishing coats: Crown Trade New Build Acrylic Gloss 6.1. Number of coats: TWO 6.2. White ONLY

10

M60 Master – Crown Paints Master M60 Specification – M60 Master

130G New build water borne gloss paint 1. Description: Interior- new galvanised 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade New Build Acrylic Gloss 3. Surfaces: New galvanised

3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-740A as appropriate 4. Initial coats: Pre-treat all cleaned bright galvanising with Crown Trade Protective Coatings T- Wash (as manufacturer’s instructions) then prime with Crown Trade Universal Metal Primer 4.1. Number of coats: ONE & ONE 5. Undercoats: Crown Trade New Build Acrylic Primer Undercoat 5.1. Number of coats: ONE 6. Finishing coats: Crown Trade New Build Acrylic Gloss 6.1. Number of coats: TWO 6.2. White ONLY

130H New build water borne gloss paint 1. Description: Interior- new or uncoated PVC-U 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade New Build Acrylic Gloss 3. Surfaces: PVC-U as identified

3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-711A as appropriate 4. Initial coats: Crown Trade PX3 All Purpose Primer (solvent borne) or Crown Trade PX4 All Purpose Primer (water borne) to bare surfaces 4.1. Number of coats: ONE 5. Undercoats: Crown Trade New Build Acrylic Primer Undercoat 5.1. Number of coats: ONE 6. Finishing coats: Crown Trade New Build Acrylic Gloss 6.1. Number of coats: TWO 6.2. White ONLY 130I Solvent borne gloss paint 1. Description: interior- new or pre-primed timber/mdf 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Full Gloss 3. Surfaces: New timber/MDF as identified 3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-770 as appropriate 4. Initial coats: Crown Trade Wood Primer 4.1. Number of coats: ONE 5. Undercoats: Crown Trade Full Undercoat 5.1. Number of coats: ONE 6. Finishing coats: Crown Trade Full Gloss 6.1. Number of coats: TWO

11

M60 Master – Crown Paints Master M60 Specification – M60 Master

130J Solvent borne gloss paint 1. Description: Interior- new or pre-primed ferrous/non-ferrous metal- excluding new galvanised

2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Full Gloss 3. Surfaces: New ferrous & non-ferrous metal, excluding new galvanised

3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-740A as appropriate 4. Initial coats: Crown Trade Universal Metal Primer 4.1. Number of coats: ONE 5. Undercoats: Crown Trade Full Undercoat 5.1. Number of coats: ONE 6. Finishing coats: Crown Trade Full Gloss 6.1. Number of coats: TWO

130K Solvent borne gloss paint 1. Description: Interior- new galvanised

2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Full Gloss 3. Surfaces: New galvanised

3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-740A as appropriate 4. Initial coats: Pre-treat all cleaned bright galvanising with Crown Trade Protective Coatings T- Wash (as manufacturer’s instructions) then prime with Crown Trade Universal Metal Primer 4.1. Number of coats: ONE & ONE 5. Undercoats: Crown Trade Full Undercoat 5.1. Number of coats: ONE 6. Finishing coats: Crown Trade Full Gloss 6.1. Number of coats: TWO 130L Solvent borne gloss paint

1. Description: Interior new & uncoated -PVC-U 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Full Gloss 3. Surfaces: PVC-U as identified

3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-711A as appropriate 4. Initial coats: Crown Trade PX3 All Purpose Primer (solvent borne) or Crown Trade PX4 All Purpose Primer (water borne) to bare surfaces 4.1. Number of coats: ONE 5. Undercoats: Crown Trade Full Undercoat 5.1. Number of coats: ONE 6. Finishing coats: Crown Trade Full Gloss 6.1. Number of coats: TWO

12

M60 Master – Crown Paints Master M60 Specification – M60 Master

130M Next generation solvent borne gloss paint 1. Description: interior- new or pre-primed timber/mdf 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Next Generation Plus Gloss 3. Surfaces: New timber/MDF as identified 3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-770 as appropriate 4. Initial coats: Crown Trade Wood Primer 4.1. Number of coats: ONE 5. Undercoats: Crown Trade Next Generation Plus Undercoat 5.1. Number of coats: ONE 6. Finishing coats: Crown Trade Next Generation Plus Gloss 6.1. Number of coats: TWO 6.2. White ONLY. 130N Next generation solvent borne gloss paint 1. Description: Interior- new or pre-primed ferrous/non-ferrous metal- excluding new galvanised 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Next Generation Plus Gloss 3. Surfaces: New ferrous & non-ferrous metal, excluding new galvanised 3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-740A as appropriate 4. Initial coats: Crown Trade Universal Metal Primer 4.1. Number of coats: ONE 5. Undercoats: Crown Trade Next Generation Plus Undercoat 5.1. Number of coats: ONE 6. Finishing coats: Crown Trade Next Generation Plus Gloss 6.1. Number of coats: TWO 6.2. White ONLY 130O Next generation solvent borne gloss paint 1. Description: Interior- new galvanised 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Next Generation Plus Gloss 3. Surfaces: New galvanised 3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-740A as appropriate 4. Initial coats: Pre-treat all cleaned bright galvanising with Crown Trade Protective Coatings T- Wash (as manufacturer’s instructions) then prime with Crown Trade Universal Metal Primer 4.1. Number of coats: ONE & ONE 5. Undercoats: Crown Trade Next Generation Plus Undercoat 5.1. Number of coats: ONE 6. Finishing coats: Crown Trade Next Generation Plus Gloss 6.1. Number of coats: TWO 6.2. White ONLY.

13

M60 Master – Crown Paints Master M60 Specification – M60 Master

130P Next generation solvent borne gloss paint

Description: Interior new & uncoated -PVC-U 1. Manufacturer: Crown Trade from Crown Paints 1.1. Product reference: Crown Trade Next Generation Plus Gloss 2. Surfaces: PVC-U as identified

2.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-711A as appropriate 3. Initial coats: Crown Trade PX3 All Purpose Primer (solvent borne) or Crown Trade PX4 All Purpose Primer (water borne) to bare surfaces 3.1. Number of coats: ONE 4. Undercoats: Crown Trade Next Generation Plus Undercoat 4.1. Number of coats: ONE 5. Finishing coats: Crown Trade Next Generation Plus Gloss 5.1. Number of coats: TWO 5.2. White ONLY.

14

M60 Master – Crown Paints Master M60 Specification – M60 Master

131A Hybrid water borne gloss paint 1. Description: interior- existing painted timber/mdf 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Fastflow Quick Dry Gloss 3. Surfaces: Timber/MDF as identified 3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-770 as appropriate 4. Initial coats: Crown Trade Fastflow Quick Dry Primer Undercoat as primer to bare, filled areas 4.1. Number of coats: ONE 5. Undercoats: Crown Trade Fastflow Quick Dry Primer Undercoat- bring forward spot primed areas and, when dry, apply overall 5.1. Number of coats: ONE+ONE 6. Finishing coats: Crown Trade Fastflow Quick Dry Gloss 6.1. Number of coats: TWO 131B Hybrid water borne gloss paint 1. Description: Interior- existing painted ferrous/non-ferrous metal 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Fastflow Quick Dry Gloss 3. Surfaces: Ferrous & non-ferrous metal as identified 3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-740A as appropriate 4. Initial coats: Crown Trade Protective Coatings High Build Rust Inhibiting Primer Undercoat spot prime to bare, or damaged pre-primed, metal. Bring forward spot primed areas with Crown Trade

Fastflow Quick Dry Primer Undercoat 4.1. Number of coats: ONE+ONE 5. Undercoats: Crown Trade Fastflow Quick Dry Primer Undercoat 5.1. Number of coats: ONE 6. Finishing coats: Crown Trade Fastflow Quick Dry Gloss 6.1. Number of coats: TWO 131C Hybrid water borne gloss paint 1. Description: Interior-existing painted PVC-U 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Fastflow Quick Dry Gloss 3. Surfaces: PVC-U as identified

3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-711A as appropriate 4. Initial coats: Crown Trade PX3 All Purpose Primer (solvent borne) or Crown Trade PX4 All Purpose Primer to all bare areas, then bring forward primed areas with Crown Trade Fastflow Quick Dry Primer Undercoat 4.1. Number of coats: ONE & ONE 5. Undercoats: Crown Trade Fastflow Quick Dry Primer Undercoat 5.1. Number of coats: ONE 6. Finishing coats: Crown Trade Fastflow Quick Dry Gloss 6.1. Number of coats: TWO

15

M60 Master – Crown Paints Master M60 Specification – M60 Master

131D New build water borne gloss paint 1. Description: interior- existing painted timber/mdf 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade New Build Acrylic Gloss 3. Surfaces: Timber/MDF as identified 3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-770 as appropriate 4. Initial coats: Crown Trade New Build Acrylic Primer Undercoat as primer to bare, filled areas 4.1. Number of coats: ONE 5. Undercoats: Crown Trade New Build Acrylic Primer Undercoat- bring forward spot primed areas and, when dry, apply overall 5.1. Number of coats: ONE+ONE 6. Finishing coats: Crown Trade New Build Acrylic Gloss 6.1. Number of coats: TWO 6.2. White ONLY. 131E New build water borne gloss paint 1. Description: Interior- existing painted ferrous/non-ferrous metal 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade New Build Acrylic Gloss 3. Surfaces: Ferrous & non-ferrous metal as identified 3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-740A as appropriate 4. Initial coats: Crown Trade Universal Metal Primer spot prime to bare, or damaged pre-primed, metal. Bring forward spot primed areas with Crown Trade New Build Acrylic Primer Undercoat 4.1. Number of coats: ONE+ONE 5. Undercoats: Crown Trade New Build Acrylic Primer Undercoat 5.1. Number of coats: ONE 6. Finishing coats: Crown Trade New Build Acrylic Gloss 6.1. Number of coats: TWO 6.2. White ONLY

16

M60 Master – Crown Paints Master M60 Specification – M60 Master

131F New build water borne gloss paint 1. Description: Interior-existing painted PVC-U 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade New Build Acrylic Gloss 3. Surfaces: PVC-U as identified

3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-711A as appropriate 4. Initial coats: Crown Trade PX3 All Purpose Primer (solvent borne) or Crown Trade PX4 All Purpose Primer to all bare areas, then bring forward primed areas with Crown Trade New Build Acrylic Primer Undercoat 4.1. Number of coats: ONE & ONE 5. Undercoats: Crown Trade New Build Acrylic Primer Undercoat 5.1. Number of coats: ONE 6. Finishing coats: Crown Trade New Build Acrylic Gloss 6.1. Number of coats: TWO 6.2. White ONLY. 131G Solvent borne gloss paint 1. Description: interior- existing painted timber/mdf 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Full Gloss 3. Surfaces: Timber/MDF as identified 3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-770 as appropriate 4. Initial coats: Crown Trade Wood Primer to bare, filled areas 4.1. Number of coats: ONE 5. Undercoats: Crown Trade Full Undercoat- bring forward spot primed areas and, when dry, apply overall 5.1. Number of coats: ONE+ONE 6. Finishing coats: Crown Trade Full Gloss 6.1. Number of coats: TWO 131H Solvent borne gloss paint 1. Description: Interior- existing painted ferrous/non-ferrous metal

2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Full Gloss 3. Surfaces: Ferrous & non-ferrous metal as identified

3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-740A as appropriate 4. Initial coats: Crown Trade Universal Metal Primer spot prime to bare, or damaged pre-primed, metal. Bring forward spot primed areas with Crown Trade Full Undercoat 4.1. Number of coats: ONE+ONE 5. Undercoats: Crown Trade Full Undercoat 5.1. Number of coats: ONE 6. Finishing coats: Crown Trade Full Gloss 6.1. Number of coats: TWO

17

M60 Master – Crown Paints Master M60 Specification – M60 Master

131I Solvent borne gloss paint 1. Description: Interior-existing painted PVC-U 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Next Generation Plus Gloss 3. Surfaces: PVC-U as identified

3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-711A as appropriate 4. Initial coats: Crown Trade PX3 All Purpose Primer (solvent borne) or Crown Trade PX4 All Purpose Primer to all bare areas, then bring forward primed areas with Crown Trade Full Undercoat 4.1. Number of coats: ONE & ONE 5. Undercoats: Crown Trade Full Undercoat 5.1. Number of coats: ONE 6. Finishing coats: Crown Trade Full Gloss 6.1. Number of coats: TWO 131J Next generation solvent borne gloss paint 1. Description: interior- existing painted timber/mdf 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Next Generation Plus Gloss 3. Surfaces: Timber/MDF as identified 3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-770 as appropriate 4. Initial coats: Crown Trade Wood Primer to bare, filled areas 4.1. Number of coats: ONE 5. Undercoats: Crown Trade Next Generation Plus Undercoat- bring forward spot primed areas and, when dry, apply overall 5.1. Number of coats: ONE+ONE 6. Finishing coats: Crown Trade Next Generation Plus Gloss 6.1. Number of coats: TWO 6.2. White ONLY.

131K Next generation solvent borne gloss paint 1. Description: Interior- existing painted ferrous/non-ferrous metal 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Next Generation Plus Gloss 3. Surfaces: Ferrous & non-ferrous metal as identified

3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-740A as appropriate 4. Initial coats: Crown Trade Universal Metal Primer spot prime to bare, or damaged pre-primed, metal. Bring forward spot primed areas with Crown Trade Next Generation Plus Undercoat 4.1. Number of coats: ONE+ONE 5. Undercoats: Crown Trade Next Generation Plus Undercoat 5.1. Number of coats: ONE 6. Finishing coats: Crown Trade Full Gloss 6.1. Number of coats: TWO 6.2. White ONLY.

18

M60 Master – Crown Paints Master M60 Specification – M60 Master

131L Next generation solvent borne gloss paint 1. Description: Interior existing painted PVC-U 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Next Generation Plus Gloss 3. Surfaces: PVC-U as identified

3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-711A as appropriate 4. Initial coats: Crown Trade PX3 All Purpose Primer (solvent borne) or Crown Trade PX4 All Purpose Primer to all bare areas, then bring forward primed areas with Crown Trade Next Generation Plus Undercoat 4.1. Number of coats: ONE & ONE 5. Undercoats: Crown Trade Next Generation Plus Undercoat 5.1. Number of coats: ONE 6. Finishing coats: Crown Trade Next Generation Plus Gloss 6.1. Number of coats: TWO 6.2. White ONLY.

19

M60 Master – Crown Paints Master M60 Specification – M60 Master

132A Solvent borne gloss paint

Description: exterior- new or pre-primed timber up to 10 years 1. Manufacturer: Sandtex Trade from Crown Paints 1.1. Product reference: Sandtex Trade Flexigloss X-tra 2. Surfaces: New timber as identified 2.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-790 as appropriate 3. Initial coats: Sandtex Trade Flexible Primer Undercoat 3.1. Number of coats: ONE 4. Finishing coats: Sandtex Trade Flexigloss X-tra 4.1. Number of coats: TWO 132B Solvent borne gloss paint 1. Description: Exterior new & uncoated - PVC-U up to 10 years 2. Manufacturer: Sandtex Trade from Crown Paints 2.1. Product reference: Sandtex Trade Flexigloss X-tra 3. Surfaces: PVC-U as identified 3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-711A as appropriate 4. Initial coats: Crown Trade PX3 All Purpose Primer (solvent borne) or Crown Trade PX4 All Purpose Primer (water borne) to bare surfaces 4.1. Number of coats: ONE 5. Undercoats: Sandtex Trade Flexible Primer Undercoat 5.1. Number of coats: ONE 6. Finishing coats: Sandtex Trade Flexigloss X-tra 6.1. Number of coats: TWO 132C Solvent borne gloss paint 1. Description: Exterior- new or pre-primed ferrous/non-ferrous metal- excluding new galvanised up to 10 years 2. Manufacturer: Sandtex Trade from Crown Paints 2.1. Product reference: Sandtex Trade Metalgloss X-tra 3. Surfaces: New ferrous & non-ferrous metal, excluding new galvanised 3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-740A as appropriate 4. Initial coats: Sandtex Trade Rust Inhibiting Primer Undercoat. 4.1. Number of coats: ONE 5. Finishing coats: Sandtex Trade Metalgloss X-tra 5.1. Number of coats: TWO

20

M60 Master – Crown Paints Master M60 Specification – M60 Master

132D Solvent borne gloss paint 1. Description: Exterior- new galvanised up to 10 years 2. Manufacturer: Sandtex Trade from Crown Paints 2.1. Product reference: Sandtex Trade Metalgloss X-tra 3. Surfaces: New galvanised

3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-740A as appropriate 4. Initial coats: Pre-treat all cleaned bright galvanising with Crown Trade Protective Coatings T- Wash (as manufacturer’s instructions) 4.1. Number of coats: ONE 5. Primer/Undercoat: Sandtex Trade Rust Inhibiting Primer Undercoat 5.1. Number of coats: ONE 6. Finishing coats: Sandtex Trade Metalgloss X-tra 6.1. Number of coats: TWO 132E Solvent borne gloss paint 1. Description: Exterior new & uncoated-pvc-u up to 10 years 2. Manufacturer: Sandtex Trade from Crown Paints 2.1. Product reference: Sandtex Trade Metalgloss X-tra 3. Surfaces: PVC-U as identified 3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-711A as appropriate 4. Initial coats: Crown Trade PX3 All Purpose Primer (solvent borne) or Crown Trade PX4 All Purpose Primer (water borne) to bare surfaces 4.1. Number of coats: ONE & ONE 5. Undercoats: Sandtex Trade Metalgloss X-tra Rust Inhibiting Primer Undercoat 5.1. Number of coats: ONE 6. Finishing coats: Sandtex Trade Metalgloss X-tra 6.1. Number of coats: TWO 132F Solvent borne gloss paint 1. Description: exterior- new or pre-primed timber 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Stronghold Exterior Gloss 3. Surfaces: New timber as identified 3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-790 as appropriate 4. Initial coats: Crown Trade Stronghold Exterior Primer Undercoat 4.1. Number of coats: ONE 5. Finishing coats: Crown Trade Stronghold Exterior Gloss 5.1. Number of coats: TWO

21

M60 Master – Crown Paints Master M60 Specification – M60 Master

132G Solvent borne gloss paint 1. Description: Exterior- new or pre-primed ferrous/non-ferrous metal- excluding new galvanised 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Stronghold Exterior Gloss 3. Surfaces: New ferrous & non-ferrous metal, excluding new galvanised 3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-740A as appropriate 4. Initial coats: Crown Trade Universal Metal Primer 4.1. Number of coats: ONE 5. Undercoats: Crown Trade Stronghold Exterior Primer Undercoat 5.1. Number of coats: ONE 6. Finishing coats: Crown Trade Stronghold Exterior Gloss 6.1. Number of coats: TWO

132H Solvent borne gloss paint 1. Description: Exterior- new galvanised 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Stronghold Exterior Gloss 3. Surfaces: New galvanised

3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-740A as appropriate 4. Initial coats: Pre-treat all cleaned bright galvanising with Crown Trade Protective Coatings T- Wash (as manufacturer’s instructions) and, when dry, apply Crown Trade Universal Metal Primer 4.1. Number of coats: ONE & ONE 5. Undercoat: Crown Trade Stronghold Exterior Primer Undercoat 5.1. Number of coats: ONE 6. Finishing coats: Crown Trade Stronghold Exterior Gloss 6.1. Number of coats: TWO 132I Solvent borne gloss paint 1. Description: Exterior new & uncoated - PVC-U up to 6 years 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Stronghold Exterior Gloss 3. Surfaces: PVC-U as identified 3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-711A as appropriate 4. Initial coats: Crown Trade PX3 All Purpose Primer (solvent borne) or Crown Trade PX4 All Purpose Primer (water borne) to bare surfaces 4.1. Number of coats: ONE 5. Undercoats: Crown Trade Stronghold Exterior Primer Undercoat 5.1. Number of coats: ONE 6. Finishing coats: Crown Trade Stronghold Exterior Gloss 6.1. Number of coats: TWO

22

M60 Master – Crown Paints Master M60 Specification – M60 Master

132J Hybrid water borne gloss paint 1. Description: Exterior- new or pre-primed timber 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Fastflow Quick Dry Gloss 3. Surfaces: New timber as identified 3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-790 as appropriate 4. Initial coats: Crown Trade Fastflow Quick Dry Primer Undercoat 4.1. Number of coats: ONE 5. Finishing coats: Crown Trade Fastflow Quick Dry Gloss 5.1. Number of coats: TWO 132K Hybrid water borne gloss paint 1. Description: Exterior- new or pre-primed ferrous/non-ferrous metal- excluding new galvanised 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Fastflow Quick Dry Gloss 3. Surfaces: New ferrous & non-ferrous metal, excluding new galvanised 3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-740A as appropriate 4. Initial coats: Crown Trade Protective Coatings High Build Rust Inhibiting Primer Undercoat 4.1. Number of coats: ONE 5. Undercoats: Crown Trade Fastflow Quick Dry Primer Undercoat 5.1. Number of coats: ONE 6. Finishing coats: Crown Trade Fastflow Quick Dry Gloss 6.1. Number of coats: TWO 132L Hybrid water borne gloss paint 1. Description: Exterior- new galvanised 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Fastflow Quick Dry Gloss 3. Surfaces: New galvanised 3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-740A as appropriate 4. Initial coats: Pre-treat all cleaned bright galvanising with Crown Trade Protective Coatings T- Wash (as manufacturer’s instructions) and, when dry, apply Crown Trade Protective Coatings High Build Rust Inhibiting Primer Undercoat. 4.1. Number of coats: ONE+ONE 5. Undercoats: Crown Trade Fastflow Quick Dry Primer Undercoat 5.1. Number of coats: ONE 6. Finishing coats: Crown Trade Fastflow Quick Dry Gloss 6.1. Number of coats: TWO

23

Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52 Page 53 Page 54 Page 55 Page 56 Page 57 Page 58 Page 59 Page 60 Page 61 Page 62 Page 63 Page 64 Page 65 Page 66 Page 67 Page 68 Page 69 Page 70 Page 71 Page 72 Page 73 Page 74 Page 75 Page 76 Page 77 Page 78 Page 79 Page 80 Page 81 Page 82 Page 83 Page 84 Page 85 Page 86 Page 87 Page 88 Page 89 Page 90 Page 91 Page 92 Page 93 Page 94 Page 95 Page 96 Page 97 Page 98 Page 99 Page 100 Page 101 Page 102 Page 103 Page 104 Page 105 Page 106

www.crowndecoratingcentres.ie

Made with FlippingBook - Online magazine maker