ENGLISH
As soon as you have finished inputting text, press the red X icon to cancel editing and to close without saving the changes. Press ENTER or on the blue tick to confirm the changes and to close editing mode.
When connecting the device, please follow the instructions in the fol- lowing order:
3.2
Positioning
4.1.2 Scroll option
Always position the CANNME7 in such a place that the skipper has a good view of the panel.
The scroll option is used when a value needs to be entered.
3.3
Mounting
Value selection
210 220 230
Mount the CANNME7 in a flat plate (4.5-12 mm). Make a hole with the right dimen- sions and mount the screen using the 4 nuts and bolts provided. Use the drilling template provided with the product (see Safety Infor- mation/Quick start guide). Make sure that packaging (P) is not damaged.
4,5 - 12 mm 3/16" - 1/2"
P
Scroll through the list of values or flick to scroll through the list quick- ly. Press the required value to stop scrolling. Press the blue tick to confirm the input and to leave editing mode or on the red X icon to cancel editing without saving the changes. 4.1.3 Slider The slider is used when it isn’t necessary to input an exact value. The slider is used to input the brightness of the screen or to enter a cer- tain level of detail.
3.3.1 Display rotation
The CANNME7 can only be mounted horizontally. The image can be rotated if necessary (0° or 180°), see section 5.2.
3.4 Connecting Connect the CANNME7 to the NMEA2000 CAN bus system. Use the M12 NMEA2000 connector on the back of the device for this. See page 112 for a detailed connection diagram.
AUTO
Press the dot and drag it to apply the desired change.
4.1.4 Checkbox
4
Introduction
The checkbox is used to select or deselect an option.
4.1
User interface
Option deselected: Option selected:
The CANNME7 is a multi-touch device, the controls of which are simi- lar to those of a modern smartphone. - Tap the screen to select a menu or item, start editing or to select or deselect a checkbox option. - Scroll through a list of available options without activating an op- tion or flick to scroll through lists quickly. - Keep an item pressed to obtain information about the relevant part. - Keep a point on the screen pressed and drag the map to the de- sired position. - With two fingers on the screen, make a pinching movement to zoom out or spread to zoom in. 4.1.1 Keyboard input When it is necessary to input items using the keyboard, a keyboard is displayed. To the top left of the text input a red X icon is displayed, and to the top right of the input a blue tick is displayed.
Press the dot and drag it to the desired position or tap the checkbox to select or deselect it.
4.2
Main screens
Three main screens are available: the dashboard, map screen and the start screen ( @ Quick Access ).
N ote When starting up, the last screen used is displayed. Press the hamburger icon to go to the start screen.
4.2.1 Dashboard
The dashboard contains two screen sets. One shows the important parameters, the other the details of the battery bank.
Press the UP arrow to switch to capital letters. Activate CAPS LOCK by pressing the UP arrow twice.
371001.01 23
Installation and user manual CANNME7 Multifunctional, multi touch display
Made with FlippingBook - professional solution for displaying marketing and sales documents online