An illuminating pictogram indicates that the function has been acti- vated. A grey pictogram indicates that the function has been deacti- vated. Some icons open a new dialogue window or screen. ENGLISH
In addition, each warning is stored in the warning list.
Warnings are classified on the basis of the effect of the reported situ- ation on the vessel and its passengers.
4.7
Brightness settings
Colour
Classification
@ Quick Access
Red
Critical
Orange
Important Information
White
AUTO
In the case of multiple warnings, the warning with the highest prior- ity is displayed first.
Brightness can be adjusted to three modes: (A) automatic, (D) day and (N) night mode.
4.4.3 Navigation
Briefly press A to activate day mode. In day mode, the letter D is dis- played on the right-hand side of the screen.
@ Quick Access >
Press and hold D to activate night mode. In night mode, the letter N is displayed on the right-hand side of the screen. In night mode, the screen’s colour scheme is changed to red only, see section 5.2. Briefly press N to return to automatic mode.
This submenu displays favourite destinations and offers the opportu- nity to adjust map settings.
4.5
Screen set selection
@ Quick Access
N ote If screen brightness is low in night mode, the screen may be fully invisible during the day. Press and hold the bottom right- hand corner of the screen to activate automatic mode.
5
Settings
Navionics
Dashboard
The selection panel for screen sets is used to select the active screen set. The Navigation screen set only has a map screen. If a Navionics SD card has been installed and activated, this will replace the standard navigation screen set.
5.1
Vessel parameters
@ Quick Access >
> Vessel details
N ote Set the vessel parameters before first use.
4.6
Shortcuts
@ Quick Access
Enter values for the following vessel parameters:
Press the shortcut for the function you wish to use or wish to switch on or off.
• Minimum safe headroom • Minimum safe shipping width • Minimum safe water depth • Route optimisation (time or distance) • Cruising speed
Sleep mode Switches the energy saving mode on or off.
Sleep
Buzzer Switches the buzzer on or off. Only switch the buzzer off when another audible signal is available.
5.2
Preferred settings
Beeper
@ Quick Access >
> Preferences
Trip Displays the route details.
Trip
Set personal preferences for the following items or restore the stand- ard preferences.
FloatBox Opens the editing mode for float boxes.
Edit FloatingBox
371001.01 25
Installation and user manual CANNME7 Multifunctional, multi touch display
Made with FlippingBook - professional solution for displaying marketing and sales documents online