ENGLISH
10 NMEA2000 network
Check and change if necessary the following settings:
Jog wheel Auto select (---) Engine* Auto select (ENGINE - PORT(1)) Electric motor powertrain* BATTERY - PORT(1) Depth Auto select (---) Water ref. speed Auto select (---) GPS Auto select (INTERNAL GPS(1)) Inside temperature None Outside temperature None Water temperature Auto select (---) Fresh water Auto select (---) Black water Auto select (---) Rudder Auto select (---)
@ Quick Access >
> Network
The CANNME7 is connected to the vessel’s NMEA2000 network.As a result of this, it can read data from other network devices.
The network menu is used to configure data sources, to obtain addi- tional information about connected devices and to calibrate specific data sources.
W arning Take particular care when using this menu. Changes can cause the device to no longer work properly.
10.1 Connected devices
@ Quick Access >
> Network > Connected devices
This menu shows a list of all devices connected to the network.
Select a device for more details. At the bottom of the device details is the option to reset the configuration for this device.
Externally connected VETUS devices may have an option to upgrade the software. Ask your local dealer for further information. Select the “Check update” item to edit and follow the instructions provided. A physical device may contain several virtual devices which can be presented to the network. You can see these virtual devices if you press the “Virtual devices” item.
Audio None Compass Auto select (---) Main battery set** BATTERY MAIN Battery 1** None Battery 2** None Battery 3** None Battery 4** None
10.2 Data sources
@ Quick Access >
> Network > Data sources
In this menu, the data sources for the various parameters can be set.
Some items are set to Auto Select, which means that the source is au- tomatically allocated on the basis of the connected network device.
Originates from: *CANV2N.. **CANNS500
10.3 Calibration of network equipment
@ Quick Access >
> Network > Device calibration
W arning Network equipment must be calibrated by an engineer!
Some equipment connected to the network must be calibrated. For example, the motor’s temperature limits and the maximum rpm must be provided.
371001.01 29
Installation and user manual CANNME7 Multifunctional, multi touch display
Made with FlippingBook - professional solution for displaying marketing and sales documents online