Operations training
Crane and Hoist / V2 02052025
Facilitate a practical fault finding exercise using manufacturers’ manuals to find a fault code or a description of a fault
Provide feedback on the participant’s performance
The participants shall:
Investigate and detect equipment faults, troubleshoot using the error codes from the relevant maintenance manual, and perform repair and replacement of components according to manuals
If repair and replacement, of the equipment at hand, is not possible or practical explain how to repair and replace components
Learning activity 10.1.6 cannot replace 10.1.5, but should be an additional learning activity
Note
TRAINING REVIEW
35 min.
The aim of this lesson is to enable the participants to reflect on and process their learning outcome and main takeaways from the module, aiming to achieve a high learning transfer from the module to their way of working.
ELEMENT 11.1 - TRAINING REVIEW
The instructor shall:
Review the overall aims and learning objectives of the module for the participants’ comparison of their learning outcomes and the achievement of their previously stated expectations for the module
Lead a discussion or Q&A aiming at the participants’ reflections of their learning outcome in relation to their ways of working
The participants shall:
Reflect on their learning outcome and main takeaways from the Crane and Hoist Inspection and Maintenance Module aiming to achieve a high learning transfer from the module to their way of working by means of:
a.
group discussions or walk and talk
b.
Q&A in class, or where suitable
Global Wind Organisation ©2025 / www.globalwindsafety.org
70 / 111
Made with FlippingBook interactive PDF creator