Lonseal - Interior Flooring Manual

Interior Flooring Manual

 Hot Yoga: for use when installing in hot yoga studios  Studios must not exceed 105 °F (40.6 °C) ambient air temperature or 85 °F (29.4 °C) substrate temperature.  When using Lonseal’s fitness flooring or Lonsafe for this type of installation, this guide should be used instead of the Fitness Flooring or Lonsafe Installation Guides .  Lonmat: for use with all Lonmat installations in marine or naval vessels  This guide may contain additional or differing installation requirements from this manual. This is intentional, and this guide will supersede the requirements in this manual where it differs.  Lonsafe: for use when installing Lonseal flooring with the Lonsafe underlayment  Hot yoga studio installations should use the appropriate guide noted above.  Foam-back products and fitness flooring are not intended for use with Lonsafe.  Marine: for use with all marine installations (excludes Lonmat, which should use the guide noted above)  This guide may contain additional or differing installation requirements from this manual. This is intentional, and this guide will supersede the requirements in this manual where it differs.  The use of Lontape as an alternative to the #400 or #650 adhesives is covered by this guide.  Patient Rooms: for use in all healthcare patient room installations, where patient beds are expected  This guide should also be used for other locations where heavy static or dynamic rolling loads may exist.  Stairs: for use with all interior stair installations  This guide may contain additional or differing installation requirements from this manual. This is intentional, and this guide will supersede the requirements in this manual where it differs.  Vehicle: for use with all ground vehicle installations  This guide may contain additional or differing installation requirements from this manual. This is intentional, and this guide will supersede the requirements in this manual where it differs.  The use of Lontape as an alternative to the #400 or #650 adhesives is covered by this guide.  Wood Grain Patterns: for use with all wood grain patterned products  This guide provides pattern repeat and additional information.

LONSEAL ®

Page 15 of 17

Revised: 9.20.2024

Disclaimer: Printed documents are uncontrolled. Always refer to www.lonseal.com for the most current technical information.

Made with FlippingBook interactive PDF creator