TREX SELECT ® CLASSIC COMPOSITE HORIZONTAL RAILING Installation Instructions
RAILING CONFIGURATIONS Note: See specific installation instructions for attachment of Trex Post Mounts or Trex Joist Mount Posts prior to installing any railing.
Standard Rail
Cutting post sleeves is NOT required. A. P ost Sleeve (see page 1 for approved post sleeves) > For use with pressure-treated post, Trex Post Mount, or Trex Joist Mount Post (INSIDE MOUNT ONLY) B. Select top rail C. Select bottom rail D. Aluminum balusters (must also use horizontal baluster spacer). See page 3 for “How to Install Standard Horizontal Railing”.
B
A
D
C
Continuous (Over the Post) Cocktail Rail
POST SLEEVES WILL NEED TO BE CUT
Post sleeves WILL NEED TO BE CUT. A. P ressure-treated post with Tr x post sleeve NOTE: » Only for use with Trex All-in-One Post sleeve or 4 x 4 post sleeve. » Trex post mounts or joist mount posts cannot be used. B. Trex board (1 x 6 or 2 x 6). NOTES: » Enhance board cannot be used. » Top boards will need to be cut to fit each rail span. C. Select top rail D. Select bottom rail E. Aluminum balusters (must also use horizontal baluster spacer). See page 5 for “How to Install Continuous (Over the Post) Cocktail Railing”.
B
C
A
E
D
Post-to-Post Cocktail Rail
Cutting post sleeves is NOT required. A. Post Sleeve (see page 1 for approved post sleeves) > For use with pressure-treated post, Trex Post Mount, or Trex Joist Mount Post (INSIDE MOUNT ONLY) B. Trex 1 x 4 board C. Select top rail D. Select bottom rail E. Aluminum balusters (must also use horizontal baluster spacer). See page 7 for “How to Install Post-to-Post Cocktail Railing”.
B
C
A
E
D
2
Have Questions? 1–800–BUY–TREX
NOTE: Construction methods are always improving. Please ensure you have the most up-to-date installation instructions by visiting: trex.com
SCHZ-0626
Made with FlippingBook interactive PDF creator