HOW TO INSTALL STANDARD HORIZONTAL RAILING/ CONTINUED TREX SELECT ®
8
Attaching Post Caps and Installing Foot Block 8. Secure post caps with silicone or PVC adhesive (apply adhesive on the inside self-centering/ corner tabs). Attach Foot Block per Foot Block instructions.
7c
NOTE: Clean up any excess adhesive before it dries.
7c. Install both bottom and top brackets on each side to post using two #9-16 x 2" wood screws (provided) . If using a 6 x 6 post sleeve use two #9-16 x 2 1/2" screws (not provided).
NOTE: Screws go in at slight angle.
IMPORTANT NOTE: SET DRILL TO LOW SPEED AND LOW CLUTCH SETTING WHEN INSTALLING THESE SCREWS. DO NOT USE IMPACT DRIVER.
HOW TO INSTALL COCKTAIL HORIZONTAL RAILING TREX SELECT ®
Cutting Post and Post Sleeve 2. M ark and cut post and post sleeve measuring from deck surface: » 36-1/8" (918 mm) for 36" (914 mm) height. » 42-1/8" (1070 mm) for 42" (1067 mm) height.
Important: ONLY use for use with pressure-treated 4 x 4 post (3.5" nominal square) and 4 x 4 post sleeve. Trex Post Mounts or Joist Mount Posts cannot be used with Select Cocktail railing.
2
36-1/8" (918 mm) or 42-1/8" (1070 mm)
3. Cutting Railings
See instructions on page 3.
4. Attaching Foot Block to Bottom Railing See instructions on page 3.
1. Installing Pressure-Treated Posts, Post aSleeve Skirts and Post Sleeves See instructions on page 3.
5
Have Questions? 1–800–BUY–TREX
NOTE: Construction methods are always improving. Please ensure you have the most up-to-date installation instructions by visiting: trex.com
SCHZ-0825
Made with FlippingBook interactive PDF creator