NEW
Electric Heat Module Product Overview
n Electric heat modules ensure cabin heating independent of chiller operation n Heat Modules are easily installed in-line into air duct of the A-Series air handlers n EHM is directly connected to A-Series electronics so no separate controls are needed n EHM further increases the comfort on board by: – Enabling heating in selective cabins while chiller is in cooling mode – Enables heating while chiller is switched off – Increasing the heat output of air handlers if extra high heat demand is needed n EHM can easily be retrofitted to existing A-Series n EHM is preinsulated to prevent condensation on the outside. It also comes with 2 stainless steel mounting brackets for wall mounting n When using EHM a flow control valve also needs to be fitted
H
L
W
EHM600W -100 mm -230 V -50/60 Hz
EHM900W -125 mm -230 V -50/60 Hz
Type
EHM1200W -150 mm -230 V -50/60 Hz
EHM1800W -150 mm -230 V -50/60 Hz
Order numbers
WBCL1209100
WBCL1209101
WBCL1209102
WBCL1209103
Capacity (W)
600
900
1,200
1,800
Dimensions (L x W x H) (mm)
370 x 100 x 170
370 x 125 x 195
370 x 150 x 220
370 x 150 x 220
Dimensions (L x W x H) (inch)
14.6 x 3.9 x 6.7
14.6 x 4.9 x 7.7
14.6 x 5.9 x 8.7
14.6 x 5.9 x 8.7
Ø Hose connection (mm)
100
125
150
150
Ø Hose connection (inch)
4
5
6
6
Voltage / Frequency
230 V / 50 – 60 Hz
230 V / 50 – 60 Hz
230 V / 50 – 60 Hz
230 V / 50 – 60 Hz
Current draw running (A)
3
4
5
8
Max. supply air temperature °F (°C)
104 (40)
104 (40)
104 (40)
104 (40)
Cut off temperature safety switch °F (°C)
104 (60)
104 (60)
140 (60)
104 (60)
Pressure loss air (Pa)
60
60
60
60
Min. air flow (m³/ h) to ensure full heat output
60
80
120
180
Weight (kg)
2.2
2.6
2.8
3
A4 Compact
A6 Compact, Slimline, Low Profile
A9 Compact, Slimline, Low Profile
A12 Compact, Slimline, Low Profile
A18 Compact, Slimline, Low Profile
A24 Compact
A36 Compact
Compatibility
EHM600W
c
c
c
c
c
c
g
EHM900W
–
–
–
g
g
c
c
EHM1200W
–
–
–
g
g
g
g
EHM1800W
–
–
–
–
–
g
g
g Standard application, check on minimum airflow in technical data.
c Only for secondary ducts with smaller diameter, check on minimum airflow in technical data.
Made with FlippingBook Online newsletter