Cylinders
Manifold Mount Block Cylinder Dimensions
Single and Double Acting No external ports or external plumbing to collect chips. These block cylinders reduce installation labor. Manifold mount block cylinders are available in the same popular sizes as our other block cylinders. Threaded plunger ends allow the use of custom attachments (Double Acting recommended for attachments or mechanisms). Springs are designed to return the cylinder and contact points, not intended to pull mechanisms.
F-8
ILMV211102 REV F
Specifications
Cylinder Capacity (kN)**
Piston Area (cm 2 ) Oil Capacity (cm 3 ) Extend Retract Extend Retract
Body Size (mm)
Minimum Length (mm)
Extended Height (mm)
Model No.
Stroke (mm)
Model No.
Extend Retract Single Acting (S/A) Cylinders, actuated hydraulically 1 direction, spring returned.
42-1110-00 42-1110-01 42-1110-02 42-1110-03 42-1110-08 42-1110-04 42-1110-05 42-1110-06 42-1110-09 42-1110-07 42-1120-00 42-1120-01 42-1120-02 42-1120-03 42-1120-08 42-1120-04 42-1120-05 42-1120-06 42-1120-09 42-1120-07
6.5
61 80 71 84
1.9 5.7 6.5
- -
- -
10.1 N/A
28.5 x 51
2.9 N/A
N/A
19
12.5 25.5
- - 42-5111-03 109 - - 42-5111-04 163.5 - - 42-5111-53 111.5 - - 42-5111-54 165.5 Models available as Block Pull Cylinders
13
17.8 N/A
51 x 51
5.1 N/A
N/A
38 51
99.5
19.3
112.5
26
12.5 25.5
73 86
14.5
29
39.9 N/A
51 x 63.5
11.4 N/A
N/A
38 51
98.5
43.4
114.5
58
Double Acting (D/A) Cylinders,actuated hydraulically both directions.
6.5
61 80 71 84
1.9 1.0 5.7 3.0 6.5 2.2
10.1 5.6
28.5 x 51
2.9 1.6
19
12.5 25.5
13
4.4
17.8 5.9
51 x 51
5.1 1.7
38 51
99.5
19.3 6.6
112.5
26
8.8
12.5 25.5
73 86
14.5 6.3 29 12.7 43.4 19.0 58 25.4
39.9 17.5
51 x 63.5
11.4 5.0
38 51
98.5
114.5
All dimensions are in mm.
** Cylinder capacities are listed at 350 bar (35 MPa) maximum operating pressure. The output force is adjustable by varying the hydraulic system pressure. To determine approximate output force for your application, multiply the Piston Area times Your System Operating Pressure. Actual force may vary slightly due to friction loss, seal and wiper drag and/or return spring forces.
ILMV251105 REV A
© Vektek December 2021
Inside US 1-800-992-0236
www.vektek.com
Made with FlippingBook - Online catalogs