Palletized Fixture Accessories
Zero-Point Systems
Installation clamping module Hydraulic opening. Pneumatic blow-out. Opening operating pressure: min. 50 bar - max. 60 bar.
Specifications
Model No.
Pull-in/locking force up to [kN]
Holding force [kN]
Blow out
Weight [Kg]
Size
● ● ●
570253 KH10 570254 KH20 570255 KH40
10 20 40
25 55
0.45 1.40 3.40
Cover and piston hardened. Repeatability < 0.005 mm.
105
Application: Zero-point clamping system for set-up-time-optimised clamping during cutting and non- cutting machining. Note: The installation clamping module has high holding, pull-in and locking forces. This is opened hydraulically (1) and mechanically locked through spring force. Subsequent uncoupling of the pressure lines is possible at all times (module is tensioned pressure-free). The clamping module with blow-out and support control has two connections: 1x hydr. opening (1) / 1x pneum. blow-out and support control (3). (The pneumatic blow-out and support control can optionally be connected.)
Dimensions
Model No.
dia.D [mm]
dia.DN [mm]
dia.D1 [mm]
H [mm]
HA [mm]
dia.LK [mm]
T [mm]
Size
M
570253 KH10 78
22
50 30 7 60 M523
570254 KH20 112 32 78 44 10 88 M6 34 570255 KH40 148 40 102 57 15 118 M8 42
Pneumatic opening. Pneumatic blow-out. Opening operating pressure: min. 8 bar - max. 12 bar. Retensioning operating pressure (turbo): min. 5 bar - max. 6 bar. Installation clamping module
Specifications
Model No.
Pull-in/locking force up to [kN]
Holding force [kN]
Blow out
Weight [Kg]
Size
K-9
● ●
570256 KP10 570257 KP20
8
25 55
0.45 1.40
17
Application: Zero-point clamping system for set-up-time-optimised clamping during cutting and non- cutting machining. Note: The installation clamping module has high holding, pull-in and locking forces. This is opened pneumatically (1) and locked mechanically through spring force. To achieve the specified pull- in and locking forces, it must be briefly retensioned pneumatically (turbo) (2). Subsequent uncoupling of the pressure lines is possible at any time (module is clamped pressure-free). The clamping module with blow-out and support control has three connections: 1x pneum. Opening (1) / 1x pneum. Retensioning (turbo) (2), 1x pneum. Blow-out and support control (3). (The pneumatic blow-out and support control can optionally be connected.)
Cover and piston hardened. Repeatability < 0.005 mm.
Dimensions
Model No.
dia.D [mm]
dia. DN [mm]
dia. D1 [mm]
H [mm]
HA [mm]
dia. LK [mm]
T [mm]
Size
M
570256 KP10 78
22
50 30 7
60 M5 23
570257 KP20 112 32
78 44 10 88 M6 34
© Vektek December 2021
Inside US 1-800-992-0236
www.vektek.com
Made with FlippingBook - Online catalogs