Power Supplies
.75 kW Advanced Workholding Pump Connected Convenience Packages
200-240 VAC 1 Phase
200-240 VAC 3 Phase
380-500 VAC 3 Phase
No. of Valves
2 Port Pumps - No Control Valves Included
Valve Type: Manifold Only • Central or remote power supply configured with “P” (pressure out) and “T” (tank return flow) port only • Valves usually mounted on the machine closer to the application, often machine controlled • Typically mounted behind or between 2 machines • Requires remote shear seal or poppet style zero leak valve • Supply your own off board valve
0 45-9565-00 45-9575-00 45-9595-00
Single Acting Continuous Connection - S/A Live System Valve Type: Manual 2-Position 3-Port • Can use coupled or uncoupled
• Recommended to run a continuously connected or single hose supply decoupled system • Operator interface is a manual valve handle • Pump located within operators reach Valve Type: 24VDC 2-Position 3-Port Normally Open
1 45-9565-12-1 45-9575-12-1 45-9595-12-1
• Recommended to run a continuously connected or single hose supply decoupled system where the pressurized time exceeds the unpressurized time • Operator interface is by remote pendant or can be wired into a machine controller NOTE: Should not be used with palletized systems as the valve is energized to unclamp. The unclamped time will be excessive, causing the valve to run hot.
J-7
1 2 4
45-9565-23-1 45-9565-23-2 45-9565-23-4
45-9575-23-1 45-9575-23-2 45-9575-23-4
45-9595-23-1 45-9595-23-2 45-9595-23-4
Double Acting Continuous Connection - D/A Live System Valve Type: Manual 3-Position 4-Port Closed Center • Recommended for continuously connected "live" systems
• Always connected to the fixture by means of hoses and or rotary unions • Operator interface is a manual valve handle • Pump located within operators reach Valve Type: 24 VDC 3-Position 4-Port Closed Center • Recommended for continuously connected "live" systems
1 45-9565-16-1 45-9575-16-1 45-9595-16-1
• Always connected to the fixture- by means of hoses and or rotary unions • Center position allows no movement of clamps when the valve is de-energized • Operator interface is by remote pendant or can be wired into a machine controller
1 2 4
45-9565-26-1 45-9565-26-2 45-9565-26-4
45-9575-26-1 45-9575-26-2 45-9575-26-4
45-9595-26-1 45-9595-26-2 45-9595-26-4
ILMV459503 REV C
Note: 525-600V, 3-Phase service input pumps are available upon request for all convenience packages and configurations of 45-9585-XX-X.
© Vektek December 2021
Inside US 1-800-992-0236
www.vektek.com
Made with FlippingBook - Online catalogs