TuffCam ™ Swing Clamps and Arms
Low Profile, Top Flange
3X 4.8 X 90 ARM CLOCKING FEATURE
D/A PLUNGER END, SHOWN WITH STANDARD ARM
N CLAMP STROKE
P
4X K***
X
M CLAMP STROKE
S/A PLUNGER END, SHOWN WITH STANDARD ARM
ORDER ARMS SEPERATELY
AD D/A ONLY
E
U
J D/A ONLY
V
5.8, SPANNER WRENCH HOLE 4.8
R
A
T
R
Y
AE D/A ONLY 10.67
C-14
2X 120
H
B
L
G
Z
REFERENCE ARM CROSSBOLT DIMENSION
D
F
B
* & ** MANIFOLD MOUNT CLAMP PORT
* & ** MANIFOLD MOUNT UNCLAMP PORT
AC* UNCLAMP- D/A
AC* CLAMP OR PORT DEVICE
Swing clamp plunger shown in the extended straight cam position. Wrench flats (AD) orientation not controlled
ILMV140021 REV G
VENT- S/A BREATHER PROVIDED
For proper sealing, the mating surface must be flat within 0.08 mm with a maximum surface roughness of 1.6 µm R a
Dimensions
ModelNo.A B D E F G H
J
K L M N P R T U V
Single Acting (S/A) Cylinders, actuated hydraulically 1 direction, spring returned.
41-4622-11 41-4622-12 41-4622-15 41-4633-11 41-4633-12 41-4633-15 41-4622-21 41-4622-22 41-4622-25 41-4633-21 41-4633-22 41-4633-25 41-4622-23 41-4622-24 41-4622-26 41-4633-23 41-4633-24 41-4633-26
62.8 196 79.5 33.5 25 13
31.74
N/A 10.7 14.5 14.5 28 71 27.4 85.5 13 35.5
77 216.5 89 33.5 25 13
38.09
N/A 13.5 18.1 16 30 89 35.1 100 12.5 44.5
Double Acting (D/A) Cylinders, actuated hydraulically both directions.
M16 x 2.0 Depth 19
62.8 185.5 79.5 33.5 25 13
31.74
10.7 14.5 14.5 28 71 27.4 85.5 13 35.5
M16 x 2.0 Depth 19
77 196.5 89 33.5 25 13
38.09
13.5 18.1 16 30 89 35.1 100 12.5 44.5
Double Acting (D/A) Long Stroke Cylinders, actuated hydraulically both directions.
32
M16 x 2.0 Depth 19
62.8 220.5 97 33 25 13
31.74
10.7 14.5
45.5 71 27.4 85.5 13 35.5
45.5
32
M16 x 2.0 Depth 19
77 228.5 105 33.5 25 13
38.09
13.5 18.1
46 89 35.1 100 12.5 44.5
46
Model No. X Y Z AC AD AE AF Single Acting (S/A) Cylinders, actuated hydraulically 1 direction, spring returned. 41-4622-11 13 G1/4 N/A M10 x 25 41-4622-12 27.4 35.1 N/A
4x B Thread To 19 Minimum Depth
A 0.25 Fixture Hole
Chamfer 45 X 0.38 Max.
41-4622-15 41-4633-11 41-4633-12
4 Clamp Feed Hole For Manifold Mounting
35.1
41.4
13 G1/4 N/A
N/A
M12 x 25
41-4633-15 Double Acting (D/A) Cylinders, actuated hydraulically both directions. 41-4622-21 13 G1/4 26.5 M10 x 25 41-4622-22 27.4 35.1 12.5
2x F 0.25
4x D 0.13
4 Unclamp/Vent Feed Hole For Manifold Mounting
41-4622-25 41-4633-21
4x C 0.13
2x E 0.25
41-4633-22 35.1 41.4
13 G1/4 32.5
12.5
M12 x 25
ILMV140023 REV C
NOTE: Follow arm length limitations in the end of this section. Mounting Dimension Low Profile Top Flange Swing Clamps ModelNoA B C D E F 41-4622-XX 63.4 M10 27.4 27.4 35.1 14.5 41-4633-XX 77.6 M12 35.1 35.1 41.4 18.1
41-4633-25 Double Acting (D/A) Long Stroke , actuated hydraulically both directions. 41-4622-23 27.4 35.1 13 G1/4 26.5 12.5 M10 x 25
41-4622-24 41-4622-26 41-4633-23 41-4633-24 41-4633-26
35.1 41.4 13 G1/4 32.5 12.5 M12 x 25
* All ports (except breather) are shipped with removable steel plugs installed. ** Counter bores for Ø7/16 x 1/16 (2-011) O-Ring face seals provided.
*** When used as manifold mounted, all (4) mounting bolts must be used to assure proper O-Ring face sealing. The recommended bolt listed in column AF.
www.vektek.com
Outside US+1-913-365-1045
© Vektek December 2021
Made with FlippingBook - Online catalogs