Swing Clamps and Arms
Arm Length Pressure Limitations Extended Arm Dimensions
C-32
F
0.5
L
T
E
D
G
H
J CAP SCREW INCLUDED
K
RAD B
C
NOTE: Follow arm length limitations above.
R
A
Clocking feature tapped hole location detail is on page C-2 for TuffCam™ and on C-29 for Standard Swing Clamps.
ILMV411100 REV G
Extended Arm Dimensions
Model No.
Capacity (kN)
A B C D E F G H
J
K L R T
44-1111-00 2 82.5 9.5 10.5 8.1 12.5 7 7 11.13-11.18 M6 x 1.00 27.2 22 9.5 15.2 44-1115-00 4.9 136.5 12.5 14.5 12.5 18 10.5 8 15.88-15.92 M8 x 1.25 33 25 12.7 22 44-1122-00 11.6 162 17.5 19 15.2 25.5 13.5 9.5 22.23-22.28 M10 x 1.25 51.6 25 16.6 31.1 44-1131-01 22 165 25.5 28.5 18.4 36.5 16.5 14.3 31.75-31.80 M16 x 1.50 70.5 25 24.6 43.8
See catalog section "standard product clocking" for suggested tapped hole location.
All dimensions are in mm.
www.vektek.com
Outside US+1-913-365-1045
© Vektek December 2021
Made with FlippingBook - Online catalogs