Swing Clamps and Arms
Recommended Machine Dimensions for Customer-Produced TuffCam ™ Low Profile Swing Clamp Arms
B
T
RAD. B/2 OPTIONAL
X MINIMUM " H" BLIND HOLE DEPTH
H .025
C-38
A
-H-
M
0.5 .13 OPTIONAL
R
K
U x V DEEP
N
G
C 0.1 THRU L x W DEEP
J THREAD
S
RAD. S/2
ILMV415001 REV K
0.25 0.25 H
End user must add tapped hole to arm in proper location/orientation for their application.
See arm clocking details on page C-12 for locating arm clocking feature tapped holes.
Customer Produced Low Profile Arm Dimensions
X S/AD/A
Swing Clamp Force (kN)
Arm Series
A B C G H J
K L MNRSTUVW
Recommended Machining Dimensions for Custom-Made Low Profile Swing Clamp Arms
44-1031-00 44-1131-00 44-1231-00 44-1032-00 44-1132-00 44-1232-00
M16 x 1.5-6H
22 25.4 51 14.5 12.7 31.78
53 16.5 2.9 20.5 22.5 13 44.5 35 6.2 25.7 43.2 32.8
M16 x 1.5-6H
33 35 70 14.5 14.2 38.14
59 16.5 3.2 N/A 25.6 14.3 44.5 35 9.6 25.5 50.8 31.0
All dimensions are in mm.
Hex Head Cap Screw for use with low profile standard, extended and double ended arms series:
NOTE: Follow arm length
44-1031-00, 44-1131-00, and 44-1231-00 use 21-5000-24 44-1032-00, 44-1132-00, and 44-1232-00 use 21-5000-28
limitations at the start of page C-30.
It is recommended that the cross bolt is replaced if the arm needs to be removed after it has been in service.
www.vektek.com
Outside US+1-913-365-1045
© Vektek December 2021
Made with FlippingBook - Online catalogs