Link Clamps and Levers
High Pressure
Single and Double Acting Available in sizes from 350 lbs to 6,800 lbs. capacities at 5,000 psi pressure. Excellent alternative to swing clamps when swing space is limited.
Single piece body/pivot design for accuracy and longevity. Link clamps clear large obstructions better than other types of clamps. Top Flange or threaded body mount from same body. Fluorocarbon seals available. Flexible plumbing options accommodate either the use of SAE fittings or manifold mounting (face seal included). Levers sold separately; see end of section. Optional In-Port Flow Control is a meter-in device with reverse free flow check valve. Optional In-Port Sequence valve is a sequencing device with reverse free flow check valve.
D-13
Single Acting
Double Acting
Single Acting
Double Acting
ILS166001 REV L
ILS166001 REV L
Single Acting
Double Acting
Effective Piston Area (sq. in.) ILS166001 REV L
Oil Capacity (cu. in.)
Port X Depth for Optional In-Port Valves*****
Vertical Clamping Stroke (in.)***
Clamp Capacity (lbs.)**
Std. Lever Length
Maximum Flow Rate (cu. in./min.)****
Model No.
Body Thread
Extend Extend Retract
Single Acting (S/A) 16-6104-00 350 16-6106-00 700 16-6109-00 1,300 16-6114-00 3,000 16-6116-00 5,000 Double Acting (D/A) 16-6204-00 450 16-6206-00 1,100 16-6209-00 2,600 16-6214-00 5,000 16-6216-00 6,800
Cylinders, actuated hydraulically 1 direction, spring returned.
0.09 1-1/16-16 UN 0.88
0.076 0.103 N/A 0.150 0.287 N/A 0.307 0.821 N/A 0.785 2.148 N/A 1.227 3.755 N/A
12 34 98
SAE 2 X .48 SAE 4 X .58 SAE 4 X .58 SAE 4 X .58 SAE 4 X .75
0.12 0.14 0.18 0.22
1-1/2-16 UN 1.13 1-7/8-16 UN 1.38 2-1/2-16 UN 1.75 3-1/8-16 UN 2.13
258 450
Cylinders, actuated hydraulically both directions.
0.09 1-1/16-16 UN 0.88
0.110 0.103 0.032 0.248 0.287 0.113 0.601 0.821 0.405 1.227 2.148 0.773 1.767 3.755 1.147
12 34 98
SAE 2 X .48 SAE 4 X .58 SAE 4 X .58 SAE 4 X .58 SAE 4 X .75
0.12 0.14 0.18 0.22
1-1/2-16 UN 1.13 1-7/8-16 UN 1.38 2-1/2-16 UN 1.75 3-1/8-16 UN 2.13
258 450
** Clamp capacities are listed at 5,000 psi maximum operating pressure with a standard length link clamp lever installed. Minimum operating pressure is 750 psi for single acting and 500 psi for double acting devices. The clamping force is adjustable by varying the hydraulic system pressure. To determine the approximate output force for your application, divide the clamp capacity shown above by 5,000 and multiply the resultant number by your system operating pressure to obtain the approximate clamping force for your application. (Actual force will vary slightly due to mechanical inefficiencies and friction.) *** Equal to +/- 3˚ with standard lever. **** To ensure maximum service life and trouble-free operation, restrict fluid flow to the above flow ratings when clamping. If you are unable to measure flow rates, the devices should be positioned in no less than 1/2 second. These recommendations apply when using the standard lever. When using the optional long lever or your custom lever, please restrict the flow rates to position the lever in no less than 1 second. ***** In-Port Valves require the use of manifold mount ports.
Dimensions Model No.
A
B C D E F G H J
K L M N P
Single Acting (S/A) 16-6104-00 1-1/16-16 UN 3.22 2.51 2.00 1.88 0.87 0.44 0.31 0.34 0.22 0.25 0.84 0.94 1.94 16-6106-00 1-1/2-16 UN 4.21 3.38 2.25 2.50 1.31 0.62 0.44 0.41 0.28 0.50 1.03 1.13 2.50 16-6109-00 1-7/8-16 UN 5.35 4.31 2.50 3.06 1.62 0.87 0.63 0.66 0.41 0.50 1.25 1.34 3.25 16-6114-00 2-1/2-16 UN 6.75 5.50 3.00 3.75 1.87 0.87 1.00 0.78 0.53 0.75 1.63 1.75 4.13 16-6116-00 3-1/8-16 UN 8.10 6.50 3.50 4.50 2.25 1.00 1.25 1.00 0.66 0.88 2.00 2.13 5.13 Double Acting (D/A) 16-6204-00 1-1/16-16 UN 3.22 2.51 2.00 1.88 0.87 0.44 0.31 0.34 0.22 0.25 0.84 0.94 1.94 16-6206-00 1-1/2-16 UN 4.21 3.38 2.25 2.50 1.31 0.62 0.44 0.41 0.28 0.50 1.03 1.13 2.50 16-6209-00 1-7/8-16 UN 5.35 4.31 2.50 3.06 1.62 0.87 0.63 0.66 0.41 0.50 1.25 1.34 3.25 16-6214-00 2-1/2-16 UN 6.75 5.50 3.00 3.75 1.87 0.87 1.00 0.78 0.53 0.75 1.63 1.75 4.13 16-6216-00 3-1/8-16 UN 8.10 6.50 3.50 4.50 2.25 1.00 1.25 1.00 0.66 0.88 2.00 2.13 5.13
© Vektek, July 2024
800-992-0236
www.vektek.com
Made with FlippingBook - Online magazine maker