Power Supplies
Advanced Workholding Pump Accessories
Pump Add-on Options (Contact your sales representative for details.) Valve Wiring Cable (1 for each valve). Pump/Machine Tool Interface Cable (all pump control in one cable). Upgrade to fluid level temperature switch. Upgrade to Electronic clog indicator return line filter. Mechanical pressure switch (no power required). Electronic pressure switch (24V power required). Manual or solenoid directional control valve functions. Check Valve (for multiple manual valves in stack). Pressure reducing valves for each circuit. Accumulator (for small or low pressure systems). Extra pendant switches (1 supplied with each different solenoid valve on pump for setup and testing). Return Line Water Absorbing Filter with models available for use without cart and with cart.
Pendant Switch or Machine Control Options Model No. Description Pendant Switch Control (1 Included with 1st valve of pump)
95-5955-37 Pendant, 6 ft, 2/3 Valve, NO, (On/Off) 95-5955-38 Pendant, 6 ft, 2/3 Valve, NC, (Off/On)
95-5955-39 Pendant, 6 ft, 2/3 Valve, NC, (Off/Momentary On) 95-5955-40 Pendant, 6 ft, 3/4 Valve, CC or PBC, (On/Off/On) 27-7422-03 Pendant Extension Cable, M12, 16.4 ft. 27-9422-02 Pendant Extension Cable, M12, 32.8 ft. CNC Machine Control 95-5954-50 Valve Wiring Cable, 1 Valve, M12, 5 pin, 16.4 Ft. CALL
Pump/Machine Tool Interface Cable, 24 pin or 36 pin, 16.4 Ft ILS559505 REV D
AWP Return Line Filter Model No.
Description
Call
Assy, Filter, Cartridge, 10 µm, Electronic Clog Indicator
31-0500-18 Replacement Filter, Cartridge, 10 µm 62-5595-07 Assy, Water Absorbing Filter, Spin-on, 10 µm, without Cart 62-5595-08 Assy, Water Absorbing Filter, Spin-on, 10 µm, with Cart 31-0500-26 Replacement Filter, Spin-on, WAF, 10 µm
1 & 2 HP Workholding Pump Options
ILS559506 and ILS559606 REV E
Pump/Machine Tool Interface Cable, 24 pin or 36 pin, Single Connection *Contact your sales representative for details. - Allow up to 1-4 or 5-6 valves to be controlled from machine. - Each valve can use a clamp and unclamp pressure switch. - Provides pump sensor feedback for diagnosis of fault. - Emergency stop input can be used to stop pump from machine. - Fully integrated to pump control, requires connection to customer machine. Valve Wiring Cable, M12, 5 pin (add one cable per valve) - Allows for a single valve to be wired and controlled from the machine. - Plugs in place of a pendant but doesn't provide pump sensor feedback. - Cost effective and simple to integrate solution for machine control of each valve.
Water Absorbing Filter
Pump/Machine Tool Interface Cable Up to 6 Independent Valve Circuits
J-15
Replacement Filter Order 31-0500-26
Oil Level / Temperature Switch
Electronic Filter Clog Indicator
Replacement Filter Order # 31-0500-18
6 Electrical Service Inputs Available for Worldwide Power Requirements
Solenoid Operated Valves 2/3 or 3/4
Pressure Reducing Valve
Check Valve Manual Operated Valve Mechanical Pressure Switch
ELECTRIC/HYDRAULIC
Pendant Switch for Solenoid Valve Control
Valve Wiring Cable
Electronic Pressure Switch
ILS559506 REV E
Accumulator
www.vektek.com
800-992-0236
© Vektek, July 2024
Made with FlippingBook - Online magazine maker