Palletized Fixture Accessories
Automatic Shutoff Valve Decouplers, One-Handed Operating Handle
Automatic Shutoff Valve Decouplers for Single and Double Acting Systems Decouplers are a convenient, self-contained package that includes quick connect couplings, filters, pilot operated check valve and an over pressure relief valve. Robust pilot operated check valve with a 1:5 pilot to check pressure for proven long term reliability. Internal 25 micron filters for added protection of pilot operated check valve through ports A1, A2, A3, A4 and C1. Additional filtration provided at port B1. Filtration is not provided at ports B2, B3, & B4 due to space constraints and the isolation of the check valve by the actuation piston. Integral accumulator available in three operating pressure ranges. SAE ports and manifold mounting (bottom and rear) connections on all models. Single acting pallet circuits require 2 hoses to the Operating Handle for pressure release. For single hose systems see the Manual Shutoff Valve Decoupler. Additional filtration available for the B return port through the use of manifold mount and in-line filtration.
NOTE: These automatic shutoff valve decouplers and operating handle must be used with a suitable pump which includes a 4 port/3 position, P-blocked center ("A" & "B" connected to tank) directional control valve for operation of single or double acting systems. See the pump convenience package for the pump model of your choice, “Pallet Decoupler (two hose)” in the Power Supplies Catalog. One automatic shutoff valve decoupler can be used to operate only one double acting or one single acting circuit. For operation of a single acting circuit, plug the decoupler outlet port "B" (as shown in the schematic).
3.12
"B1" QUICK CONNECTOR "UNCLAMP"
SAE 6 PORT BOTH ENDS
1.63
1.63 3.50
.40
2.45
3x MACHINED FOR 1/4 SHCS
2.23
"A1" QUICK CONNECT "CLAMP"
3.50
3.15
2.65
1.30
37 JIC 7/16-20
30
1.06 1.06
.22
2.73
2.28
1.75
3.42
2.50
"B1" QUICK CONNECTOR UNCLAMP "A1" QUICK CONNECTOR CLAMP
J-3
3.52
B1
A1
SAE 6 MANIFOLD MOUNT
6.97
TRIGGER PULL BACK TO CONNECT AND DISCONNECT HANDLE. HYDRAULIC PRESSURE MUST BE AT 0 PSI. TO
K-3
4x DRILLED FOR 1/4 SHCS
PLUG "B" PORT FOR S/A SYSTEMS
B3 A3
2.13
1.25
A2 A4
B2 B4
CONNECT OR DISCONNECT
2.27 4.62 4.25 2.27
1.24
.19
.19
ILS560019 REV F
1.20
.80
Provides a fast, positive connection to the Decoupler. Positive lock/un-lock design eliminates missed connections. Ergonomic design reduces operator fatigue. Maximum working pressure is 5,000 psi. One-Handed Operating Handle Model No. 56-0008-00 For use with Decoupler Model Nos. 56-0005-23, 56-0005-24, 56-0005-25 or 56-0005-26, 56-0005-42, 56-0005-43 or 56-0005-46
1.24
1.13
B1 A1 C1
MINIMUM OF 20% CLAMP PRESSURE MUST BE APPLIED TO UNCLAMP
2.53
SAE 6 MANIFOLD MOUNT
ILS560024 REV J
Decouplers with Integral Accumulator Model No. Pressure Range (psi) Accumulator Capacity (cu. in.) For proper sealing, mating surface must be flat within 0.003 in. with a maximum 63 µ in. R a surface finish.
Optional Filters
Optional In-Line Filter
In-Port (For Manifold Mounting)
Filter Plate (For Manifold Mounting) 70-8420-05 (BOTTOM A4 & B4) OR 70-8420-06 (REAR A3 & B3)
56-0005-42 400-1,500 56-0005-23 1,000-3,500
3.8 3.6
70-0437-71 (Ports A3, B3, B4)
70-0401-71
56-0005-24 2,000-5,000 3.2 For use with Operating Handle Model No. 56-0008-00.
© Vektek, July 2024
800-992-0236
www.vektek.com
Made with FlippingBook - Online magazine maker