TuffLink ™ 360 ° Levers
Standard and Self-Produced Dimensions
Minimum Lever Length Using lever shorter than minimum lever length will produce large clamping forces leading to premature failure of link plates or pins.
B
A
R Threads
S
G -A-
H .005
J .005
K Max Min
Q
C
L
E
0.2369 0.2362 0.2765 0.2756 0.3552 0.3543 0.4341 0.4331 0.5129 0.5118 0.6310 0.6299 0.2370 0.2362 0.2765 0.2756 0.3552 0.3543 0.4341 0.4331 0.5129 0.5118 0.6310 0.6299
E
K
Radius F
.001 A
.030 X 45 Chamfer
Full Radius
D .005
M .005
T Hex
N
ILS916009 REV E
Dimensions
Lever Model No.
For Link Clamp Model No.*
G
A B C D E F
H J L M N Q R
S T
Max Min
Standard Length Lever 91-6112-01 16-XX12-00 1.38 1.8110.5510.472 0.197 0.197 0.1984 0.1972 0.591 0.118 0.433 0.209 0.54 1.00 1/4-20 UNC 0.156 0.437 91-6115-01 16-XX15-00 1.63 2.1460.7090.551 0.236 0.236 0.2378 0.2366 0.709 0.197 0.520 0.248 0.64 1.25 5/16-18 UNC0.187 0.500 91-6118-01 16-XX18-00 2.01 2.6770.7870.709 0.315 0.315 0.3169 0.3155 0.866 0.118 0.693 0.327 0.86 1.25 3/8-16 UNC 0.219 0.562 91-6122-01 16-XX22-00 2.32 3.1500.9840.866 0.394 0.394 0.3956 0.3942 1.043 0.157 0.866 0.406 1.07 1.50 1/2-13 UNC 0.312 0.750 91-6128-01 16-3X28-00 2.83 3.8191.1811.024 0.472 0.472 0.4748 0.4731 1.260 0.197 1.039 0.484 1.28 2.00 5/8-11 UNC 0.375 0.937 91-6132-01 16-3X32-00 3.41 4.5871.4171.260 0.551 0.551 0.5535 0.5518 1.575 0.236 1.213 0.563 1.49 2.00 3/4-10 UNC 0.422 1.125 Extended Length Lever 91-6112-02 16-XX12-00 N/A 2.600 0.551 0.472 0.197 0.197 0.1984 0.1972 0.591 0.118 0.433 0.209 0.54 N/A N/A N/A N/A 91-6115-02 16-XX15-00 N/A 3.070 0.709 0.551 0.236 0.236 0.2378 0.2366 0.709 0.197 0.520 0.248 0.64 N/A N/A N/A N/A 91-6118-02 16-XX18-00 N/A 3.820 0.787 0.709 0.315 0.315 0.3169 0.3155 0.866 0.118 0.693 0.327 0.86 N/A N/A N/A N/A 91-6122-02 16-XX22-00 N/A 4.430 0.984 0.866 0.394 0.394 0.3956 0.3942 1.043 0.157 0.866 0.406 1.07 N/A N/A N/A N/A 91-6128-02 16-3X28-00 N/A 5.390 1.181 1.024 0.472 0.472 0.4748 0.4731 1.260 0.197 1.039 0.484 1.28 N/A N/A N/A N/A 91-6132-02 16-3X32-00 N/A 6.420 1.417 1.260 0.551 0.551 0.5535 0.5518 1.575 0.236 1.213 0.563 1.49 N/A N/A N/A N/A
P-4
*Link Clamps to be ordered separately.
NOTE: Levers are for both Single and Double Acting TuffLink™ 360° clamps.
www.vektek.com
800-992-0236
© Vektek, January 2023
Made with FlippingBook - Online magazine maker