VersaCam™ Swing Clamp
Threaded Body
Single and Double Acting n Available in four capacities from 450 to 5,000 lbs. n Standard swing is 90°; swing angles less than 90° require swing restrictors. Swing angles greater than 90° are special order products. n To avoid cylinder damage and preserve warranty use recommended flow rate limits and time calculations. n Arm clocking feature is compatible with all standard Vektek arms. Hardened V-cam tracks resist damage and give you a built in extra cam or straight line option should you accidentally damage one.
C-27
SWING CLAMP PLUNGER SHOWN IN THE EXTENDED LH CAM POSITION SINGLE ACTING DOUBLE ACTING
ILS150100 REV K
Effective Piston Area (sq. in.)
Oil Capacity (cu. in.)****
Vertical Clamping Stroke (in.)***
Total Stroke (Swing + Vertical)
Swing Clamp Direction
Cylinder Capacity (lbs.)**
Standard Arm Length**
Model No.
Body Thread
Retract
Extend Retract
Single Acting (S/A) 15-0105-03-R Right Left Straight 15-0105-03-L 15-0105-03-S 15-0109-01-R Right Left Straight 15-0109-01-L 15-0109-01-S 15-0113-04-R Right Left Straight 15-0113-04-S 15-0113-04-L 15-0113-12-R Right Left Straight 15-0113-12-L 15-0113-12-S 15-0118-00-R Right Left Straight 15-0118-00-S 15-0118-00-L Double Acting (D/A) 15-0205-03-R Right Left Straight 15-0205-03-S 15-0205-03-L 15-0209-01-R Right Left Straight 15-0209-01-L 15-0209-01-S 15-0213-04-R Right Left Straight 15-0213-04-S 15-0213-04-L 15-0218-00-R Right Left Straight 15-0218-00-L 15-0218-00-S
Cylinders, actuated hydraulically 1 direction, spring returned.
.22 .22 .57 .31 .31 .79 .50 .50
450
0.57
1 1/16-16
1.06
.098
N/A
.056
1,100
0.79
1 1/2-16
1.50
.295
N/A
.233
2,600
1.16
1 7/8-16
2.00
.626
N/A
.726
1.16 .50
2,600
.50
1.16
1 7/8-16
2.00
.626
N/A
.726
1.16
.63 .63
5,000
1.66
2 1/2-16
2.50
1.178
N/A 1.955
1.66
Cylinders, actuated hydraulically both directions.
.22 .22 .57 .31 .31 .79 .50 .50
450
.57
1 1/16-16
1.06
.098
.142 .056
1,100
.79
1 1/2-16
1.50
.295
.475
.233
2,600
1.16
1 7/8-16
2.00
.626
1.423 .726
1.16 .63 .63 1.66
5,000
1.66
2 1/2-16
2.50
1.178
3.992 1.955
WARNING! Never allow swing arm to contact workpiece or fixture during arm rotation. ** Cylinder capacities are listed at 5,000 psi maximum operating pressure, with a standard length VektorFlo ® arm installed. Minimum operating pressure is 750 psi for single acting, 500 psi for double acting The clamping force is adjustable by varying the hydraulic system pressure. To determine the approximate output force for your application, divide the cylinder capacity shown above by 5,000, and multiply the resultant number by your system operating pressure to obtain the approximate clamping force for your application. (Actual force will vary slightly due to internal cantilever loading, friction loss and/or return springs.) *** To allow for piece part height variations, it is recommended that the vertical travel be set to about 50% of the vertical stroke. **** To ensure maximum service life and trouble-free operation, restrict fluid flow to the level indicated in the Clamp Time and Fluid Flow Rate Chart for VersaCam.
Dimensions
Order arms separately.
Model No.
A
B
C
D
E
F
G
H
Single Acting (S/A) 15-0105-03- L,R,S
1 1/16-16 4.28
4.02 5.32 6.81 9.31 4.02 5.32 6.81 9.31
2.02 2.54 3.35 4.71 2.02 2.54 3.35 4.71
0.94 1.27 1.30 1.52 0.94 1.27 1.30 1.52
0.75 1.09 1.06 1.19 0.75 1.09 1.06 1.19
0.27 0.38 0.36 0.39 0.27 0.38 0.36 0.39
0.437 0.625 0.875 1.250 0.437 0.625 0.875 1.250
15-0109-01- L,R,S 15-0113-04- L,R,S 15-0118-00- L,R,S
1 1/2-16 1 7/8-16 2 1/2-16
5.68 7.33 9.96
Double Acting (D/A) 15-0205-03- L,R,S
1 1/16-16 4.28
15-0209-01- L,R,S 15-0213-04- L,R,S 15-0218-00- L,R,S
1 1/2-16 1 7/8-16 2 1/2-16
5.68 7.33 9.96
© Vektek, January 2023
800-992-0236
www.vektek.com
Made with FlippingBook - Online magazine maker