TuffCam ™ 7 MPa Swing Clamps
Bottom Flange Swing Clamp
Dimensions Model No.
L1-4125-00 L1-4132-00 L1-4140-00 L1-4150-00 L1-4163-00 L1-4180-00
Double Acting (D/A) Cylinders, actuated hydraulically both directions. A 124.5 135 163.5 197 228 263.5 B 40 47 56 70 85 103 C 54.5 58 66 84 98 115.5 D 26 26 26 30 34 35 E 51.5 55.5 71.5 86 97 113 F 20 23.5 28 35 42.5 51.5 G 20 23.5 28 35 42.5 51.5 J 4.8 5.8 6.8 8.8 10.8 12.8 L 13 13 13 15 17 20 M 10 10 13 16 18 23 N G 1/8 G 1/8 G 1/8 G 1/4 G 1/4 G 1/4 P ID 4.0 x CS 3.0 ID 4.0 x CS 3.0 ID 4.0 x CS 3.0 ID 8.0 x CS 3.0 ID 8.0 x CS 3.0 ID 8.0 x CS 3.0 Q 15 18 22 28 36 45 R 8 8 10 12 14 14 S 18.5 19.5 25 30 32 35 T 79.5 83.5 99.5 118 133 150 V 116.75 125.5 152 183 210 241.25 W 2 2 2.67 2.67 3.33 4 X
C-6
M8 x 1.00
M10 x 1.25
M12 x 1.50
M14 x 1.50
M18 x 1.50
M22 x 1.50
Y
3
3
4
4
5
6
Z 13 MA 35
17 42
19 51
22 63
27 77
32
95 MB 15.5 18.5 22.5 27.5 33.5 41.5 MC 15.5 18.5 22.5 27.5 33.5 41.5 MD M4 M5 M6 M8 M10 M12 ME 26.5 26.5 30 39 45.5 54 MF 10 10 13 16 18 23 MG 3 3 3 6 6 6 Add the letter -L or -R to the end of your model number to indicate swing direction.
Above Plate Mounting Con guration Plumb through the xture using manifold mount port.
Under Plate Mounting Con guration Plumb through tubing using the G port
For proper sealing, the mating surface must be flat within 0.08 mm with a maximum surface roughness of 1.6 µm R a
www.vektek.com
1-800-992-0236
© Vektek February 2021
Made with FlippingBook - professional solution for displaying marketing and sales documents online