Palletized Fixture Accessories
Accumulators Maintains circuit pressure while the pallet or tombstone is disconnected from the pump using a decoupler. Piston-type, inert gas precharged
Hydraulic fluid compresses the precharged inert gas across the piston during circuit pressurization. The pressurized gas provides additional fluid to the circuit to reduce pressure changes in the event of small seeps, thermal expansion or contraction while the pallet or tombstone is in the machine. • The 2 MPa (20 Bar) to 10 MPa (100 Bar) operating pressure model has a gas precharge of 1.7 MPa (17 Bar). Perform annual maintenance in accordance with the instructions provided with each accumulator. Contact Vektek for additional copies of the annual maintenance instructions or to arrange for factory performed annual maintenance.
accumulators compensate for pallet pressure changes during machining.
G 1/4 Threads.
L9-0116-05 2 - 10 MPa (20 - 100 Bar)
System Operating Pressure
0 1 2 3 4 5 6 7 8 9 10 0 HYDRAULIC SYSTEM OPERATING PRESSURE (MPa)
Approximate Useable Volume At Maximum System Pressure
Model No. L9-0116-05
ILML101102 REV B
SAE 6 PORT (THRU FEED TO OPPOSITE SIDE FOR D/A DEVICES)
TWO SAE 6 TO G1/4 ADAPTERS (43-0000-24) INCLUDED WITH L5-6001-01
SAE 6 PORT (ALTERNATIVE ACCUMULATOR PORT)
7MPa Manual Shutoff Valve Decoupler for Single Acting Systems This Decoupler is a convenient, self-contained package that includes a quick connect coupling, manual shutoff valve with handle, accumulator, filter screen, pressure gauge and over-pressure relief valve. Includes auxiliary ports that can be used for double acting pallet circuits or compressed air.
G1/4 OUTLET PRESSURE PORT
VALVE SHOWN IN CLAMPED POSITION. ROTATE 90 CW TO UNCLAMP
Accumulator Capacity (cm3)
MALE CONNECTOR (30-7727-66) PROVIDED. ORDER FEMALE SEPARATELY (30-7827-66).
2X MACHINED FOR M6 SHCS
ILML56010 REV A
© Vektek February 2021
Made with FlippingBook - professional solution for displaying marketing and sales documents online