LintEater® Operator Manual | RLE202


Step  9 

Clean area behind dryer as well as the back of the dryer itself using the Lint Trap brush and a vacuum

Step  10

a) Remove vent from the back of the dryer. b) Hook - up a shop vac using the included “Vacuum Adapter” or attach an electric leaf blower to vent. Attachment can be made by using a piece of duct tape. c) Be sure that the outside vent hood is taped open before turning vacuum on!


If vent compresses when the vacuum is turned on, turn vacuum off immediately. This indicates a blockage or restriction in the vent and should be checked by a professional. 


Made with FlippingBook - professional solution for displaying marketing and sales documents online