Flat Scrape The additional falt scraper is used with thin edgebanding. This is the final position before the buffing station. Results are a crisp and clean edge. Rough Trim Rough trim motors are used to remove the majority of the excess edgebanding material prior to the fine or radius trim motors, which results in a higher finish-cut quality and faster processing speeds. 4 Glue Glue is rolled on followed by pressure rollers. The amount and temperature of glue applied is easily adjustable right from the touch screen. The Glue Roller is supplied by an auger that ensures ample glue supply and recitculates unused glue. 2 6
Fine Trim Top and bottom fine trim spindles have adjustable angle and 2 axis adjustment with digital counters for precise and predictable setting. This station is used for radius or beveled applications. End Cut Dual independent motors allow for the end trim to be set at up to a 15° angle, ensuring clean cuts without unintended contact with the sides of the panel. Both end trim saws use copy rollers to accurately trace the profile of the panel. 3 Pre-Mill Two diamond cutters, rotating counter-rotational to prevent tear out, remove a selected amount of edge to square the edge and remove minor imperfections to allow for superior glue line quality. 1 5
Buff Buffers restore the original finish to the edge tape as they exit the machine. The top buffer moves with the pressure beam so adjustment for different thickness panels is unnecessary. Panels come off finished needing no additional touch-ups. 7
20
Made with FlippingBook Ebook Creator