Buff 8 Buffers restore the original finish to the edge tape as they exit the machine. The top buffer moves with the pressure beam so adjustment for different thickness panels is unnecessary. Panels come off finished needing no additional touch-ups. Radius Scrape Top and bottom radius scrapers remove tooling marks that can be left on thicker tapes after cutting. An air blast unit removes the scrapings, and they are extracted through the dust collection unit. Glue Glue is rolled on followed by pressure rollers. The amount and temperature of glue applied is easily adjustable right from the touch screen. The Glue Roller is supplied by an auger that ensures ample glue supply and recitculates unused glue. Top & Bottom Trim Pneumatically controlled flat and radius cutters remove excess edgebanding. Stepper motors control adjustments for different thickness edgebanding. Tape and radius change over is as easy as a button. 4 2 6
Corner Round The dual motor corner rounding station operates at 12,000 rpm to machine an appropriately sized radius onto the leading and trailing corners, as well as the vertical corner edges, creating smooth corners. End Cut Dual independent motors allow for the end trim to be set at up to a 15° angle, ensuring clean cuts without unintended contact with the sides of the panel. Both end trim saws use copy rollers to accurately trace the profile of the panel. 3 Pre-Mill Two diamond cutters, rotating counter-rotational to prevent tear out, remove a selected amount of edge to square the edge and remove minor imperfections to allow for superior glue line quality. 1 5 7 Flat Scrape The additional falt scraper is used with thin edgebanding. This is the final position before the buffing station. Results are a crisp and clean edge.
24
Made with FlippingBook Ebook Creator