A
5HP CYCLONE DUST COLLECTOR
5HP, 220V, 60Hz, Single phase
High static air pressure system for CNC, sanding, and other fine dust applications. Includes modular stacking filter system with efficiency gauge to alert the operator for cleaning. Full-welded, steel cyclone separator captures and removes fine dust and bulk debris from the airstream to provide continuously high suction power and reduce filter maintenance downtime. Waste disposal configuration 1 x 60 gallon.
B
7.5HP BAG DUST COLLECTOR
7.5HP, 220V, 60Hz, Three phase
The NewCNC enclosure-less dust collector is designed for the collection of sawdust and is ideal for indoor use in smaller wood shops, or for more localized extraction dedicated to specific woodworking machinery. The integral mechanical shaker cleaning system increases production time by reducing labor required to maintain filter efficiency. The bags can be mechanically shaken after the fan is switched off (per NFPA guidelines). • The filter housing supports 36 anti-static polyester filter sleeves into a tube sheet, which is mounted atop the material collection hopper that empties the collected material into plastic bags. The collector frame is made of primed and painted sheet steel. The material handling fan is rated for S1 duty cycle (continuous running). • The filters are rated at 1 micron and 99.9% efficiency. • The capacity of this 7.5 HP collector is 5000cfm rated at 6.8” water pressure. • Features a low noise blower @ 80-dba. (Below the recommended 85-dba for 8-hour exposure.)
C
10HP BAG DUST COLLECTOR
10HP, 220V, 60Hz, Three phase
The NewCNC enclosure-less dust collector is designed for the collection of sawdust and is ideal for indoor use in smaller wood shops, or for more localized extraction dedicated to specific woodworking machinery. The integral mechanical shaker cleaning system increases production time by reducing labor required to maintain filter efficiency. The bags can be mechanically shaken after the fan is switched off (per NFPA guidelines). • The filter housing supports 48 anti-static polyester filter sleeves into a tube sheet, which is mounted atop the material collection hopper that empties the collected material into plastic bags. The collector frame is made of primed and painted sheet steel. The material handling fan is rated for S1 duty cycle (continuous running). • The filters are rated at 1 micron and 99.9% efficiency. • The capacity of this 10 HP collector is 5000cfm rated at 8.1” water pressure. • Features a low noise blower @ 80-dba. (Below the recommended 85-dba for 8-hour exposure.)
47
Made with FlippingBook Ebook Creator