OPTIONAL: NON-ROTARY GUTTER CLEANING
1
DETERMINE BUILD-UP Determine type of build-up in gutters // see page 2.
2
CONNECT THE POLES Connect and hand-tighten as many interlocking ROTARY DRIVE EXTENSION POLES as needed to reach desired gutter height. A 6 ft. Extension Kit is available and sold separately (Part Number: GSX906). ATTACH THE BRUSH Attach the GUTTER BRUSH WITH WATER JET NOZZLE to the curved tube section at an angle and direction best suited for your cleaning method. FLIP THE GRIP Install the GRIP HANDLE at the very bottom of the base pole section facing “up”. This gives you much more control as you apply a twisting motion while lifting the debris up and out of the gutter. CLEAN THE GUTTERS It’s recommended that you start cleaning the gutter from the down spout end and drag debris away from the downspout. This helps prevent excessive debris from falling into the downspout. As you drag the GUTTER BRUSH WITH WATER JET NOZZLE down the gutter, stop occasionally to remove the debris. Remove debris by tilting the tool slightly and pushing into the debris as you lift the debris up and out of the gutter. Twist the pole while lifting the debris away from the gutter. HANDLING GUTTER SUPPORTS Once you reach a gutter support, lift as much debris out of the gutter as possible and then push remaining debris under and past the support. Pull the GUTTER BRUSH WITH WATER JET NOZZLE back slightly and lift up and over gutter support. While lowering back into the gutter, angle the brush back under the support to grab debris. Continue the drag and lift process.
3
4
5
6
7
DEBRIS CLEAN-UP Collect debris on a tarp and dispose. It’s best to clean the ground area before rinsing the gutter clean with water.
8
RINSING THE GUTTER Remove the CORDLESS DRILL and DRILL ADAPTER from the ROTARY DRIVE EXTENSION POLE and attach the HOSE ADAPTER WATER CONTROL VALVE and garden hose. Attach the GUTTER BRUSH WITH WATER JET NOZZLE tool. Turn on the water and use the GUTTER BRUSH WITH WATER JET NOZZLE to rinse the inside and outside of the gutter clean.
PRO TIP • On windy days, work in the same direction as the wind. This will prevent leaves from blowing toward you as you work.
3
4
5
7
GUTTER BRUSH WITH WATER JET NOZZLE
GutterSweep™ Operator Manual
4
Made with FlippingBook - professional solution for displaying marketing and sales documents online