Trex® Lighting Installation Overview

TREX® LIGHTING–METAL/ALUMINUM/ENHANCE STEEL POST/PREPARATION

5

Follow Instructions below for all Metal Post Mounts Unless Otherwise Stated Signature Aluminum Rail Post Select Aluminum Rail Post Enhance Steel Rail Post PREPARING METAL POSTS FOR LIGHTED POST CAPS AND UNDER RAIL LIGHTING 1 Review COMPATIBLE POST WITH LIGHTING CHART to determine the metal posts that are suitable with lighted post cap, under rail lighting, as well as approved railing systems used. 2. E nsure proper blocking has been installed as per requirements set forth in detailed product railing post installation instructions.

5. W hen installing Signature or Select Aluminum posts, drill through decking and blocking using long 1/2" drill bit. When installing Enhance Steel posts, drill through decking and blocking using a long 9/16" drill bit. 6. If installing lighting and using posts that require bracket installation, use information as outlined or use Trex designated templates to locate bracket placement. All measurements listed are from the DECKING SURFACE.

3

7. Attach Posts per posts instructions.

3. U sing post as template, place post in desired location, and mark location of mounting bolts.

4

4. S et post aside and use an “X” pattern between marked locations, and mark center location.

19

LIGHT-OVERVIEW-1026

Made with FlippingBook Annual report maker